COIL AS 1720970 - Caterpillar

Illustration 1 g06117921
Tighten Clamp System using Access Locations (A).
Clamp System should be torqued to 610 N m (450 lb ft). Clamp tightening tool is provided. Using tool, apply 712 N (160 lb) of force at end of extension handle to achieve 610 N m (450 lb ft) of torque.Clamp system should be retorqued after the first 4, 8 and 40 hours of operation. Refer to Safety Messages - Torque. Torquing the Clamp System should be done each time the system is re-engaged.If cab vibration is heard or felt, system should be torqued properly.
Illustration 2 g06117923The above decal provides a visual indicator of clamp system and the Locked and Unlocked positions. Refer to Safety Messages - Clamp Box.Be sure that the Clamp Box is torqued and in Locked position before traveling or operating machine.Confirm indicator shows that the clamp system is in the Unlocked position before attempting to tilt cab using hydraulic power supply and cylinder.