COIL AS 2379628 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     1    Start By:
Remove the fuel transfer pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to the Operation and Maintenance Manual.
Illustration 1 g01052034
Disconnect harness assembly (8) .
Remove bolts (7) from elbow (6) .
Remove bolts (3) from the clamps.
Remove bolts (2) and remove bracket (1) .
Remove bolts (5) that hold housing (4) to the water pump. Remove housing (4) .
Illustration 2 g01052037
Remove elbow (6) and tube (9) .
Illustration 3 g01052039
Remove bolts (11) and nuts (10) . Remove guards (12) .
Illustration 4 g01052041
Remove bolts (14) and remove the elbow and tube (13) .
Illustration 5 g00916836
Remove bolts (15) .
Illustration 6 g00916838
Install Tooling (A) and a suitable lifting device onto the oil pump.
Illustration 7 g03830107
Remove bolts (16) and slide the oil pump away from the drive. Remove oil pump (17) . The weight of oil pump (17) is approximately 45 kg (100 lb).