parts catalog

COIL AS 2559985 - Caterpillar

2559985 COIL AS Caterpillar parts 901C, 902C, 903C COIL
Alternative (cross code) number:
Caterpillar 2559985 COIL AS
Weight: 0.83 pounds 0 kg.

Buy COIL AS 2559985 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2559985:

COMPACT WHEEL LOADER  901C   902C   903C   Caterpillar
Number on catalog scheme: 15
  For full view, you need register


Removal Procedure
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: The secondary steering valve is located on the left side of the rear frame.
Illustration 1 g00814220
Disconnect two electrical connectors (1) .
Disconnect two hose assemblies (2) .
Disconnect hose assembly (5) .
Remove three bolts (4) and the washers.
Remove secondary steering valve (3) .

Caterpillar parts catalog:

Caterpillar parts catalog
901C Compact Wheel Loader W4T00001-UP (MACHINE) POWERED BY C1.8 Engine
902C Compact Wheel Loader W5T00001-UP (MACHINE) POWERED BY C2.4 Engine
903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine

Parts coil Caterpillar catalog:

621H, D10R, D11R, D9R
3997741 COIL AS
924K, 930K, 938K
621G, 725, 730, 735, 740, 770, 772
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 844K, 854K, 990K, 992K, 993K, 994H
8V3004 COIL AS
916, 926, 936, 936F, G936, IT28, IT28B
916, 926, 936, 936F, G936, IT28, IT28B
7G3475 COIL
621, 637D, 834B, 836, 988B, 988F, 988F II, 992C, 992D, 994, 994D, D7G
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.