COIL AS-HEATER 2662434 - Caterpillar

Illustration 54 g00674952
Install two forcing screws and Tooling (J).
Attach a suitable lifting device and lifting slings to Tooling (J).
Use the suitable lifting device in order to remove adapter (73). The weight of adapter (73) is 30 kg (65 lb). Note: If necessary, use forcing screws to separate adapter (73) from the housing.
Illustration 55 g00674953
Remove two O-ring seals (74) from adapter (73).
Illustration 56 g00674954
Remove race (75) and seal (76) from adapter (73).
Illustration 57 g00674955
Remove gear assembly (77).
Illustration 58 g00674956
Use Tooling (F) in order to remove bearing (78) from gear assembly (77).
Illustration 59 g00674957
Remove retaining ring (79) and adapter (80) from gear assembly (77).
Illustration 60 g00674959
Remove retaining ring (81) from adapter (80). Remove plate (82).
Illustration 61 g00674960
Use Tooling (F) in order to remove bearing (83) from gear assembly (77).
Illustration 62 g00674961
Remove shim pack (84) and race (85).
Illustration 63 g00674980
Remove three bolts (86) and cover (87).
Illustration 64 g00674982
Remove O-ring seal (88) from cover (87).
Illustration 65 g00674983
Remove bolt (89) and the washer.
Remove idler gear shaft (90).
Illustration 66 g00674984
Remove idler gear assembly (91).
Illustration 67 g00674986
Remove two bearings (92) and ring (93) from idler gear assembly (91).
Illustration 68 g00674987
Remove four bolts (94) and block (95).
Illustration 69 g00674989
Remove five O-rings (96) and three plugs (97).
Repeat steps 71 through 90 in order to remove the remaining pump adapter.