COIL AS-EVAPORATOR 3428127 - Caterpillar

Illustration 5 g01216462
Install bolt (33) and washer (34) . Repeat for the opposite side.
Illustration 6 g01216456
Connect hose assembly (29) , (30) , and (31) .
Illustration 7 g01216227
Connect hose assembly (26) , (27) , and (28) .
Illustration 8 g01216216
Install bolt (23) , (24) , and (25) .
Illustration 9 g01216137
Install grommets (22) . Position bracket (21) and install bolt (20) .
Illustration 10 g01216127
Install bolts (17) to door assemblies (18) .
Illustration 11 g01216117
Connect hose assemblies (13) , (14) , (15) , and (16) .
Illustration 12 g01216072
Tighten clamps (12) .
Illustration 13 g01216068
Tighten clamps (11) .
Illustration 14 g01216062
Install bolt (10) .
Illustration 15 g01216055
Install bolts (8) and (9) .
Illustration 16 g01216046
Attach Tooling (A) and a suitable lifting device to plate (5) and position plate (5) . The weight of plate (5) is approximately 34 kg (75 lb). Install bolts (6) . Repeat for the remaining plate (5) .
Illustration 17 g01216013
Remove the suitable lifting devices from lift cylinders (4) and extend lift cylinders (4) .
Illustration 18 g01216003
Apply Tooling (D) to pin (1) and install pin (1) . Position retainer (2) and install bolts (3) . Repeat for the lift cylinder on the opposite side.
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".End By:
Install the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard (Tilt) - Remove and Install".
Install the engine side guards. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove".