3T5048 COIL AS-FIELD Caterpillar parts
3208
Rating:
Alternative (cross code) number:
CA3T5048
3T-5048
3T5048
CA3T5048
3T-5048
3T5048
Weight: 3 pounds 1 kg.
MARINE ENGINE,
Compatible equipment models: 3T5048:
Number on catalog scheme:
11
For full view, you need register
Information:
Hydraulic Lines, Cylinders, Bucket, Bucket Control And Frame
Tilt Cylinder Lines
1-Right hand-outer tube assembly to cylinder head end. Left hand-inner tube assembly to cylinder rod end is behind outer tube assembly. 2-Right tilt cylinder. 3-Head end and rod end tube assembly connections to hydraulic oil supply tank.Tilt Cylinder Removal
1-Head end oil line. 2-Rod end oil line. 3-Washer bar pin lock. 4-Rod pin. 5-Bolt and nut. 6-Head end pin. Lift Cylinder Lines
1-Left cylinder head end tube assembly. 2-Left cylinder rod end tube assembly. 3-Head end and rod end tube assemblies from hydraulic oil supply tank. 4-Right cylinder rod end tube assembly. 5-Right cylinder head end tube assembly.Lift Cylinder Removal
8B7548 Push Puller.8B7549 Leg (two).8S6586 Forcing Screw.8S6588 Adapter.8H684 Ratchet Box Wrench.With the bucket in a fully dumped position, raise the lift arms to horizontal and place a support under each arm.
1-Head end tube assembly. 2-Rod end tube assembly. 3-Lift kickout rod end pin on right cylinder.Place a sling around the cylinder and support it with a hoist.
4-Recoil spring guards. 5-Washer bar. 6-Washer bar. 7-Pin.
8-Pin. Tools required: 8B7548 Push Puller, 8B7549 Legs, 8S6586 Forcing Screw, 8S6588 Adapter, 8H684 Ratchet Box Wrench. Lift Cylinder Disassembly
4S9181 Expander4S9449 Compressor4S9446 Clamp. 1 To install rings, use a 4S9181 Expander, 4S9449 Compressor and a 4S9446 Clamp. Refer to GENERAL INSTRUCTIONS.2 Tighten head bolts with rod fully extended.Tilt Cylinder Disassembly
4S9181 Expander4S9449 Compressor4S9446 Clamp. 1 To install rings, use a 4S9181 Expander, 4S9449 Compressor and a 4S9446 Clamp. Refer to GENERAL INSTRUCTIONS.2 Tighten head bolts with rod fully extended.
Tilt Cylinder Lines
1-Right hand-outer tube assembly to cylinder head end. Left hand-inner tube assembly to cylinder rod end is behind outer tube assembly. 2-Right tilt cylinder. 3-Head end and rod end tube assembly connections to hydraulic oil supply tank.Tilt Cylinder Removal
1-Head end oil line. 2-Rod end oil line. 3-Washer bar pin lock. 4-Rod pin. 5-Bolt and nut. 6-Head end pin. Lift Cylinder Lines
1-Left cylinder head end tube assembly. 2-Left cylinder rod end tube assembly. 3-Head end and rod end tube assemblies from hydraulic oil supply tank. 4-Right cylinder rod end tube assembly. 5-Right cylinder head end tube assembly.Lift Cylinder Removal
8B7548 Push Puller.8B7549 Leg (two).8S6586 Forcing Screw.8S6588 Adapter.8H684 Ratchet Box Wrench.With the bucket in a fully dumped position, raise the lift arms to horizontal and place a support under each arm.
1-Head end tube assembly. 2-Rod end tube assembly. 3-Lift kickout rod end pin on right cylinder.Place a sling around the cylinder and support it with a hoist.
4-Recoil spring guards. 5-Washer bar. 6-Washer bar. 7-Pin.
8-Pin. Tools required: 8B7548 Push Puller, 8B7549 Legs, 8S6586 Forcing Screw, 8S6588 Adapter, 8H684 Ratchet Box Wrench. Lift Cylinder Disassembly
4S9181 Expander4S9449 Compressor4S9446 Clamp. 1 To install rings, use a 4S9181 Expander, 4S9449 Compressor and a 4S9446 Clamp. Refer to GENERAL INSTRUCTIONS.2 Tighten head bolts with rod fully extended.Tilt Cylinder Disassembly
4S9181 Expander4S9449 Compressor4S9446 Clamp. 1 To install rings, use a 4S9181 Expander, 4S9449 Compressor and a 4S9446 Clamp. Refer to GENERAL INSTRUCTIONS.2 Tighten head bolts with rod fully extended.