COIL AS 6T8470 - Caterpillar

Proper nitrogen inflation equipment, and training in using the equipment, are necessary to avoid over inflation. A tire blowout or rim failure can result from improper or misused equipment and personal injury or death can occur.A tire blowout and/or rim failure can occur if the inflation equipment is not used correctly, due to the fact that a fully charged nitrogen cylinder's pressure is approximately 15000 kPa (2200 psi).
There are other benefits to using nitrogen in addition to reducing the risk of an explosion. The use of nitrogen for tire inflation lessens the slow oxidation of the rubber. Use of nitrogen also slows gradual tire deterioration. This is especially important for tires that are expected to have a long service life of at least four years. Nitrogen reduces the corrosion of rim components. Nitrogen also reduces problems that result from disassembly.
A tire blowout or a rim failure can cause personal injury.Use a self-attaching inflation chuck and stand behind the tread when inflating a tire, to prevent personal injury.
Note: Do not set the tire inflation equipment regulator higher than 140 kPa (20 psi) over the recommended tire pressure.Use 6V-4040 Inflation Group or an equivalent inflation group to inflate tires with a nitrogen gas cylinder. Reference: For tire inflation instructions, refer to Special Instruction, SMHS7867, "Nitrogen Tire Inflation Group".For nitrogen inflation, use the same tire pressures that are used for air inflation. Consult your tire dealer for operating pressures.