COIL AS-FIELD 8T8568 - Caterpillar

Engine Oil
The information that is provided is the latest recommendations for Caterpillar engines. This information supersedes all previous recommendations which have been published for the Caterpillar engines that are covered by this publication. Special lubricants are required for some applications and it will be necessary to continue to use these special products.
These recommendations are subject to change without notice. Contact your local Caterpillar dealer for the most up to date fluids recommendations.
ECF-1 Specification Diesel Engine Oils
The Engine Crankcase Fluid - 1 (ECF-1) specification has been introduced by Caterpillar in order to provide additional performance to the oils that are marketed under the American Petroleum Institute (API) oil classifications. The ECF-1 specification is applicable to those products that meet the requirements of the specification.
Table 1
Diesel Engine Oil
Specifications and/or Classifications    
Specification and/or Classification     Precombustion Chamber     Direct Injection (1)    
Cat ECF-1 (2)     Recommended     Recommended    
CG-4 (3)     Acceptable at a Reduced Drain Interval     Acceptable at a Reduced Drain Interval    
CF-4 (4), CF-2 (5)     Unacceptable     Unacceptable    
CF (6)     Acceptable     Unacceptable    
CE, CD, CC, and CD-2 (7)     Obsolete     Obsolete    
( 1 ) Most Caterpillar engines that were built after 1991 are direct injection (DI) diesel engines. Diesel engine oils that are only a single viscosity grade are not acceptable for use in Caterpillar DI diesel engines. Multigrade diesel engine oils are required.
( 2 ) API CI-4, CI-4 PLUS, and CH-4 oils are acceptable if the requirements of Caterpillar's ECF-1 specification are met. CI-4, CI-4 PLUS, and CH-4 oils that have not met the requirements of Caterpillar's ECF-1 specification may cause reduced engine life.
( 3 ) API CG-4 oils are acceptable for all Caterpillar diesel engines. When API CG-4 oils are used, the oil drain interval should not exceed the standard oil drain interval for your engine.
( 4 ) API CF-4 oils are not recommended for Caterpillar diesel engines.
( 5 ) API CF-2 and CD-2 oils are classifications for two-cycle diesel engines. Caterpillar does not sell engines that use API CF-2 and CD-2 oils.
( 6 ) API CF oils are not recommended for use in Caterpillar direct injection (DI) diesel engines.
( 7 ) API has not authorized the CC, CD, CD-2, and CE classifications since 1January 1996.Note: When oil meets more than one API classification, the applicable footnote is determined by the highest API classification that is met.Example - An oil that meets both the API CG-4 and the API CF oil classifications. In this case, the API CG-4 footnote applies.Cat DEO (Diesel Engine Oil)
Caterpillar oils have been developed and tested in order to provide the full performance and service life that has been designed and built into Caterpillar Engines. Cat DEO exceeds the requirements of the ECF-1 specification by passing four additional proprietary tests of diesel engine oil. Caterpillar oils are currently used to fill diesel engines at the factory. These oils are offered by Caterpillar dealers for continued use when the engine