AVSPARE.COM
parts catalog

COLLAR 0003576 - Caterpillar



0003576 COLLAR Caterpillar parts COLLAR
Rating:
61
Alternative (cross code) number:
CA0003576
000-3576
0003576
Caterpillar 0003576 COLLAR

Buy COLLAR 0003576 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g00862139
Enter a document name and description in the appropriate text boxes. Press the "OK"button. The "Fleet/Key Configuration saved successfully" message box displays. Press the "Cancel" push button to exit the "Print New Document To File" dialog box without saving the file. You will return to the "Fleet Configuration" dialog box.
Press "OK" to return to the "Fleet/Key Configuration" screen. Loading Data from a File
Connect the service tool to the ECM to be programmed.
Select "Copy Configuration" from the "Service" menu, and then select "Fleet/Key Configuration" from the sub-menu. If there is no recently loaded data available the "No data is available..." message box displays.
Press "No" that you do not want to load data from the ECM. The "Fleet/Key Configuration screen" displays.
Press the "Load from File" push button. The "File Management" dialog box displays.
If you press the "Load from File" push button with unsaved data on the "Fleet/Key Configuration" screen, a message box displays asking if you want to save the changes.
From the" File Management" dialog box, highlight the file from the "Files" list box, and then highlight the "Fleet/Key Configuration document" that you want to load from the "Documents" list box.
Open the document. As the data loads, a progress bar displays. Then, the "Fleet Configuration" message box displays.
Press "OK". The "Fleet/Key Configuration" screen displays with the file data. Programming the ECM
Note: The data must be loaded from a file before you can program an ECM.Note: Keys that are already programmed into the ECM can be unchecked from the "Fleet/Key Configuration" screen. This is only a time saving measure. If you do not uncheck the keys, the "Program ECM" message box displays. This message box lists all keys that were not programmed because the keys were already stored.Press the "Program ECM" push button. The "ECM Selector" dialog box displays.
Illustration 2 g00921601Highlight an ECM and press "OK" The "Please wait" message box displays. Then the "Testing ECM" progress bar displays. You can cancel the uploading process at any time, by pressing the "Cancel" push button. The "Are you sure..." message box displays. Press "Yes" to cancel uploading the data or "No" not to cancel.Refer to the following procedures when you "Append" or "Replace" the key list. Refer to the "Append" section to append the list. Refer to the "Replace" section to replace the list.Append
Connect the service tool to the ECM to be programmed.
Start the Caterpillar Electronic Technician (ET) Note: This procedure requires Caterpillar Electronic Technician (ET) version 2002A or later.
Illustration 3 g00911250
Select "Copy Configuration" from the "Service" menu, and then select "Fleet/Key Configuration" from the sub-menu.
Open the document. As the data loads, a progress bar displays. Then, the "Fleet Configuration" message box displays.
Press "OK". The "Fleet/Key Configuration" screen displays with the file data.
Click on the "Program ECM" button. This displays the Fleet key information box.
Illustration 4 g00900403
Click on the "Append" button.
Illustration 5 g00900409
Click on the "Yes" button if you are prompted. When the data has been successfully uploaded, the "Programming complete." message box displays. Press "OK"Note: MSS can store a maximum number of


Parts collar Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.