COLLAR 1357926 - Caterpillar

Heat-induced burns can occur when some people use a seat heater. Do not use the seat heater if you have a reduced ability to sense temperature changes, a reduced ability to feel pain, or have sensitive skin.
Note: The operator seat that is provided with this machine is in compliance with the appropriate class of ISO 7096.Adjust the seat to allow full travel of the pedals. Make the seat adjustments when the operator is sitting against the back of the seat.
Illustration 1 g02588676
Backrest Cushion Angle (1) - Pull the lever upward. Hold the lever upward and adjust the backrest cushion to the desired angle. Release the lever to lock the backrest cushion into position.
Fore and Aft Position (2) - Pull the lever upward. Hold the lever upward and slide the seat forward or backward to the desired position. Release the lever to lock the seat into position.
Heated Seat (If Equipped) (3) - Press the button to activate the heated seat.
Ride Adjustment Lever (4) - Push down on lever (7) to increase the stiffness of the ride . Pull up on the lever to decrease the stiffness of the ride .
Seat Height (5) - Press the left-hand side of the rocker switch to raise the seat. Press the right-hand side of the rocker switch to lower the seat.
Illustration 2 g01249908
Lumbar Support (6) - Turn the knob backward to increase support to the lower back. Turn the knob forward to decrease support to the lower back.
Illustration 3 g02588742Pull up on the headrest to remove extension (7).