COLLAR-BOTTOM 4B3504 - Caterpillar

Illustration 1 g03365178
Table 1
Specification for the 352-9767 Electric Starting Motor Gp
Item Qty Part Specification Description
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
1 1 4B-2049 Nut Ground terminal.
Torque to 3.4 1.2 N m (30.1 10.6 lb in).
2 1 4B-2049 Nut Switch terminal.
The switch terminal must be insulated with heat shrinkable tubing. Do not use molded terminals.
Torque to 3.4 1.2 N m (30.1 10.6 lb in).
3 1 6V-8188 Nut Ground terminal.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
4 1 6V-8188 Nut Motor terminal.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
5 1 6V-8188 Nut Battery terminal.
A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
6 1 6V-8188 Nut Motor frame terminal.
Torque to 30.5 3.5 N m (269.9 31.0 lb in).
- - - Pull-in current at 20 V and 25 °C (77 °F) is 49.3 3.3 Amp.
Hold-in current at 20 V and 25 °C (77 °F) is 6.8 Amp max.
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
- - - No load conditions at 25 °C (77 °F):
Speed is 6950 1650 rpm.
Current draw is 115 25 Amp.
Voltage is 23 VDC.