COLLAR-TRACK ROLLER 8E5467 - Caterpillar

8E5467 COLLAR-TRACK ROLLER Caterpillar parts 215C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8E5467
8E-5467
8E5467

Weight: 7 pounds 3 kg.

Buy COLLAR-TRACK ROLLER 8E5467 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Show more prices Caterpillar parts

Compatible equipment models: 8E5467:

EXCAVATOR 215C Caterpillar

Number on catalog scheme: 4

Caterpillar 8E5467 Parts scheme COLLAR-TRACK ROLLER

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 270 -
B - Loctite 5900 -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01078406
If studs (14) are loose or the threads are damaged, install new studs in front housing (10). Apply Tooling (A) to the threads of studs (14). Install the O-ring seals on the studs and install the studs in the front housing.
Thoroughly clean the mating surfaces of plate (13) and front housing (10).
Install gasket (12) on plate (13). Note: Trim the gasket even with the bottom of the front housing after assembly.
Apply Tooling (B) to the bottom of gasket (12) in order to fill the space at the front housing and the engine oil pan.
Install front housing (10) on the dowel pins on the cylinder block.
Install bolts (11) in front housing (10).
Tighten bolts (15).
Illustration 2 g01078272
Install bolt (7) and nuts (6).
Install bolts (8) and nuts (9).
Install cable strap (5) on the front housing and on the cylinder head.
Illustration 3 g01078059
Install the bolts and clips (1).
Install bolts (3).
Install bracket (2) on plate (4) and the front housing. End By:
Install the crankshaft front seal and the wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Front Seal - Install".
Install the camshaft gear. Refer to Disassembly and Assembly, "Camshaft Gear - Remove and Install".
Install the engine support. Refer to Disassembly and Assembly, "Engine Support (Front) - Remove and Install".
Install the camshaft position sensor. Refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".