1P9378 COLLECTOR Caterpillar parts
225
Rating:
Alternative (cross code) number:
CA1P9378
1P-9378
1P9378
CA1P9378
1P-9378
1P9378
Weight: 16 pounds 7 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Replacement Parts for Snow Removal UTV ATV Cart Machinery for 1P9378 Collector EXH Fit for Caterpillar Model-DFC589-Gl69867
Generic Quality-engineered parts specifically for lawn care, snow removal, UTV, ATV, and golf cart equipment || Made from rugged, weatherproof materials for longevity across all outdoor applications || Designed for a precise fit, making repairs and replacements simple and effective || Keeps machinery running smoothly, reducing wear and tear for long-term use || Universal compatibility with many brands and models, providing broad coverage for different equipment
Generic Quality-engineered parts specifically for lawn care, snow removal, UTV, ATV, and golf cart equipment || Made from rugged, weatherproof materials for longevity across all outdoor applications || Designed for a precise fit, making repairs and replacements simple and effective || Keeps machinery running smoothly, reducing wear and tear for long-term use || Universal compatibility with many brands and models, providing broad coverage for different equipment
$157.79
23 Aug 2023
Amazon.com
CTP 1P9378 Exhaust Collector for Model 225
CTP For model 225 || Sold in each || Easy in-and-out fit
CTP For model 225 || Sold in each || Easy in-and-out fit
$158.08
18 Jul 2023
Amazon.com
CTP 1P9378 Exhaust Collector for Model 225
CTP For model 225 || Sold in each || Easy in-and-out fit
CTP For model 225 || Sold in each || Easy in-and-out fit
Number on catalog scheme:
10
For full view, you need register
Compatible equipment models: 1P9378:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0820 Hydraulic Puller 1
8B-7548 Push-Puller Tool Group 1
8B-7559 Adapter 2
8B-7561 Step Plate 1
5H-1504 Hard Washer 3
9U-6600 Hand Hydraulic Pump 1
B 125-0200 Camshaft Pilot As 2
C 125-0201 Camshaft Guide As 1
D 8T-3169 Crank Assembly 1 Start By:
Remove the rocker shaft assemblies and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
It is necessary to remove the electronic control module in order to remove the camshaft from the right hand side of the engine. Refer to Disassembly and Assembly, "Electronic Control Module (Engine) - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The following procedure is for removing the camshaft from the left hand side of the engine.
Illustration 1 g01122149
Remove camshaft covers (1).
Illustration 2 g01157699
Remove cover (2) from the front housing.
Illustration 3 g01122147
Push valve lifters (3) away from the camshaft. Hold the valve lifters in position with O-ring seals.
Illustration 4 g01122151
Remove cover (4) from the flywheel housing. Remove speed/timing sensor (5) from the flywheel housing.
Illustration 5 g01122250
Remove bolt (6). Remove ring (7).
Illustration 6 g01122265
Place the three washers from Tooling (A) behind plate (9) and install bolt (6). Note: Plate (9) must be installed in order to keep camshaft drive gear (8) on the camshaft during the removal procedure. Plate (9) can be used from the right hand camshaft drive gear. If necessary, fabricate a plate that has a diameter of 76 mm (3.0 inch). The thickness of the plate must be 19.00 mm (0.750 inch) thick. Drill a hole 22.00 mm (0.875 inch) in the center of the plate.
Illustration 7 g01122324
Do not apply more than 51675 kPa (7500 psi) pressure to the hydraulic puller. The adapters are rated at 6 1/2 tons each and the hydraulic puller is rated at 17 tons at 68900 kPa (10000 psi). If too much pressure is applied, the gear may be damaged.
Install Tooling (A) on camshaft drive gear (8). Apply 51675 kPa (7500 psi) to the puller. Strike the screw on the puller with a hammer until camshaft drive gear (8) is free from the camshaft. Remove Tooling (A) from the camshaft drive gear. Remove the camshaft drive gear from the camshaft.
Illustration 8 g01122334
Remove bolts (11) and thrust washer (10).
Remove bolts (12) from the front housing.
Illustration 9 g01122335
Install Tooling (B) onto both ends of the camshaft.
Install Tooling (C) on the front housing. Note: Tooling (C) can be installed on the flywheel housing in order to remove the camshaft from the rear.
Install Tooling (D) on the end of Tooling (B). Note: The following Step is for 3508B Engines.
Rotate the camshaft with Tooling (D) and pull the camshaft
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0820 Hydraulic Puller 1
8B-7548 Push-Puller Tool Group 1
8B-7559 Adapter 2
8B-7561 Step Plate 1
5H-1504 Hard Washer 3
9U-6600 Hand Hydraulic Pump 1
B 125-0200 Camshaft Pilot As 2
C 125-0201 Camshaft Guide As 1
D 8T-3169 Crank Assembly 1 Start By:
Remove the rocker shaft assemblies and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
It is necessary to remove the electronic control module in order to remove the camshaft from the right hand side of the engine. Refer to Disassembly and Assembly, "Electronic Control Module (Engine) - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The following procedure is for removing the camshaft from the left hand side of the engine.
Illustration 1 g01122149
Remove camshaft covers (1).
Illustration 2 g01157699
Remove cover (2) from the front housing.
Illustration 3 g01122147
Push valve lifters (3) away from the camshaft. Hold the valve lifters in position with O-ring seals.
Illustration 4 g01122151
Remove cover (4) from the flywheel housing. Remove speed/timing sensor (5) from the flywheel housing.
Illustration 5 g01122250
Remove bolt (6). Remove ring (7).
Illustration 6 g01122265
Place the three washers from Tooling (A) behind plate (9) and install bolt (6). Note: Plate (9) must be installed in order to keep camshaft drive gear (8) on the camshaft during the removal procedure. Plate (9) can be used from the right hand camshaft drive gear. If necessary, fabricate a plate that has a diameter of 76 mm (3.0 inch). The thickness of the plate must be 19.00 mm (0.750 inch) thick. Drill a hole 22.00 mm (0.875 inch) in the center of the plate.
Illustration 7 g01122324
Do not apply more than 51675 kPa (7500 psi) pressure to the hydraulic puller. The adapters are rated at 6 1/2 tons each and the hydraulic puller is rated at 17 tons at 68900 kPa (10000 psi). If too much pressure is applied, the gear may be damaged.
Install Tooling (A) on camshaft drive gear (8). Apply 51675 kPa (7500 psi) to the puller. Strike the screw on the puller with a hammer until camshaft drive gear (8) is free from the camshaft. Remove Tooling (A) from the camshaft drive gear. Remove the camshaft drive gear from the camshaft.
Illustration 8 g01122334
Remove bolts (11) and thrust washer (10).
Remove bolts (12) from the front housing.
Illustration 9 g01122335
Install Tooling (B) onto both ends of the camshaft.
Install Tooling (C) on the front housing. Note: Tooling (C) can be installed on the flywheel housing in order to remove the camshaft from the rear.
Install Tooling (D) on the end of Tooling (B). Note: The following Step is for 3508B Engines.
Rotate the camshaft with Tooling (D) and pull the camshaft
Caterpillar parts catalog:
Parts collector Caterpillar catalog:
2S7402
COLLECTOR ASSEM.
621, 657, 666, 773, 824B, 988, D342C, D379, D398, G379
621, 657, 666, 773, 824B, 988, D342C, D379, D398, G379
2H5255
COLLECTOR (OIL)
D364, D375D
D364, D375D
3N1619
COLLECTOR ASSEM.
D346, D348, D353C
D346, D348, D353C
6L7543
COLLECTOR ASSEM.
D346, D348, D353C
D346, D348, D353C
3N4950
COLLECTOR AS
3116, 3208
3116, 3208
5037759
COLLECTOR GP-DUST
Caterpillar
Caterpillar
2U1789
COLLECTOR RING
D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400
D250B, D25C, D300B, D30C, D350C, D35C, D35HP, D400
4N1769
COLLECTOR-SCAVENGE
824C, 826C, 980C, 980F, 980G, R2900
824C, 826C, 980C, 980F, 980G, R2900
9S3219
COLLECTOR
613
613
2P7303
COLLECTOR
613
613