COLLET AS 9V5994 - Caterpillar

9V5994 COLLET AS Caterpillar parts 988B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9V5994
9V-5994
9V5994

Weight: 7 pounds 3 kg.

Buy COLLET AS 9V5994 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V5994:

WHEEL LOADER 988B Caterpillar

Number on catalog scheme: 28

Caterpillar 9V5994 Parts scheme COLLET AS

For full view, you need register

Information:

Table 1
Method for determining flow loss
Pump flow at 690 kPa (100 psi)
− Pump flow at 6900 kPa (1000 psi)
Flow loss
Table 2
Example of determining flow loss
217.6 L/min (57.5 US gpm)
− 196.8 L/min (52.0 US gpm)
20.8 L/min (5.5 US gpm) Flow loss is used as a measure of pump performance. Flow loss is expressed as a percentage of pump flow.
Table 3
Method of determining percent of flow loss
Flow loss (L/min or US gpm) × 100 = Percent of flow loss
Pump flow at 690 kPa (100 psi)
Table 4
Example of determining percent of flow loss
20.8 L (5.5 US gal) × 100 = 9.5%
217.6 L/min (57.5 US gpm) If the percent of flow loss is more than 10%, the pump performance is inadequate.Note: The values in the examples are not set values for any specific pump or for any specific pump condition. Refer to the Specifications for the specific machine.Test On The Machine
Install a 5P-3600 Hydraulic Flow Meter on the pressure side of the pump. Run the engine at high idle. Measure the pump flow at 690 kPa (100 psi), and at 6900 kPa (1000 psi). Use these values in the following formula (table 5).
Table 5
Method of determining percent of flow loss
Flow loss (L/min or US gpm) × 100 = Percent of flow loss
Pump flow at 690 kPa (100 psi) Test On The Bench
If the test bench can be run at 6900 kPa (1000 psi) and at full pump rpm, determine the percent of flow loss by using the following formula (table 6).
Table 6
Method of determining percent of flow loss
Flow loss (L/min or US gpm) × 100 = Percent of flow loss
Pump flow at 690 kPa (100 psi) If the test bench cannot be run at 6900 kPa (1000 psi) at full pump rpm, run the pump shaft at 1000 rpm. Measure the pump flow at 690 kPa (100 psi) and at 6900 kPa (1000 psi). Use these values in the top portion of the following formula (table 7). For the bottom part of the formula, run the pump shaft at 2000 rpm. Measure the pump flow at 690 kPa (100 psi).
Table 7
Pump flow at 690 kPa (100 psi)
− Pump flow at 6900 kPa (1000 psi) × 100 = Percent of flow loss
Pump flow at 690 kPa (100 psi) and at 2000 rpm