COMBINER & RELIEF VALVE GP 4T5964 - Caterpillar

4T5964 COMBINER & RELIEF VALVE GP Caterpillar parts 245, 245B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4T5964
4T-5964
4T5964

Caterpillar 4T5964 COMBINER & RELIEF VALVE GP

Weight: 73 pounds 33 kg.

Buy COMBINER & RELIEF VALVE GP 4T5964 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

This part in 1 request: Show. This information for suppliers only!

#1237007 4T5964

2023-11-07

Compatible equipment models: 4T5964:

EXCAVATOR 245 245B Caterpillar

Number on catalog scheme: 5

Caterpillar 4T5964 Parts scheme COMBINER & RELIEF VALVE GP

For full view, you need register

Information:

Illustration 1 g00103694
Raise the bulldozer blade and block up the bulldozer blade. When you remove the cutting edges and the end bits, maintain the bulldozer blade at a minimum height.
Remove the bolts. Then remove the cutting edge and the end bits.
Thoroughly clean all contact surfaces.
Inspect the opposite side of the cutting edge. If the opposite side of the cutting edge is not worn, turn the opposite side of the cutting edge outward and install the cutting edge.
If both sides of the cutting edge are worn, install a new cutting edge section.
Repeat Step 4 and Step 5 for the end bits.
Install all bolts and tighten the bolts to the specified torque. Refer to Operation and Maintenance Manual, "Torques for Ground Engaging Tools".
Raise the bulldozer blade and remove the blocking. Lower the bulldozer blade to the ground.
After you operate the machine for a few hours, check all bolts for the proper torque.