COMPRESSOR GP-A 0R2890 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery or Battery Cable - Disconnect
Engine Storage Procedure - Check
Fuel System - Prime
Daily
Coolant Level - Check
Driven Equipment - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Check/Clean
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection
Initial 20 to 40 Service Hours
Belts - Inspect/Adjust/Replace
Initial 250 Service Hours
Engine Valve Lash - Check
Engine Valve Rotators - Inspect
Fuel Injector - Inspect/Adjust
Every 250 Service Hours
Aftercooler Core - Clean/Test
Belts - Inspect/Adjust/Replace
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Engine Protective Devices - Check
Fan Drive Bearing - Lubricate
Hoses and Clamps - Inspect/Replace
Radiator - Clean
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Fuel System Secondary Filter - Replace
Fuel System Primary Filter (Water Separator) Element - Replace
Every 500 Service Hours or 3 Months
Battery Electrolyte Level - Check
Every 1500 Service Hours
Engine Crankcase Breather - Clean
Fumes Disposal Filter Element - Replace
Every 2000 Service Hours
Fuel Injector - Inspect/Adjust
Every Year
Coolant Sample (Level 2) - Obtain
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Every 3000 Service Hours
Crankshaft Vibration Damper - Inspect
Engine - Clean
Engine Mounts - Inspect
Engine Valve Rotators - Inspect
Every 3000 Service Hours or 3 Years
Coolant (DEAC) - Change
Every 4500 Service Hours
Engine Speed/Timing Sensor - Clean/Inspect
Every 5000 Service Hours
Starting Motor - Inspect
Turbocharger - Inspect
Water Pump - Inspect
Every 6000 Service Hours or 3 Years
Coolant (ELC) - Change
Every 6000 Service Hours or 6 Years
Coolant Extender (ELC) - Add
Engine Speed/Timing Sensor - Clean/Inspect
Every 8000 Service Hours
Fan Drive Bearing - Replace
Every 19 000 L (5000 US gal) of Fuel or 250 Service Hours
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
PM Level 2 - Every 83 250 L (22 000 US gal) of Fuel or 2000 Service Hours or 1 Year
Engine Valve Lash - Check
Every 228 000 L (60 000 US gal) of Fuel or 3000 Service Hours