COMPRESSOR GP-B 0R2897 - Caterpillar

2. Remove six bolts and lockwashers (1). Remove cover (2). Disconnect the four hydraulic hoses to the stabilizer cylinders.3. Put identification on the tube assemblies for correct assembly. 4. Disconnect all tube assemblies (3) from the control valve.5. Remove four nuts (4). Remove the four tube assemblies to the stabilizer cylinders. Remove four bolts and lockwashers (5). 6. Fasten a hoist to the console. Remove console (6). Weight is 184 lb. (83 kg). 7. Remove four bolts and lockwashers (7). 8. Remove four bolts and lockwashers (9). Remove control valve (8). Use two persons or a hoist. Weight is 106 lb. (47.7 kg). 9. Remove two bolts and lockwashers (11). Remove two nuts, lockwashers and screws (12). Remove grab iron (10). 10. Remove three bolts and lockwashers (13). Remove cover (14). 11. Remove four bolts and lockwashers (15). Remove cover (16).Install Console
1. Check all parts for damage. If damaged, use new parts for replacement. 2. Put cover (1) in position. Install the four lockwashers and bolts that hold the cover in position. 3. Put cover (2) in position. Install three lockwashers and bolts that hold the cover in position. 4. Put grab iron (3) in position. Install the two screws, lockwashers, nuts, also the two bolts and lockwashers that hold the grab iron in position. 5. Use two persons or a hoist. Weight is 106 lb. (47.7 kg). Put control valve (4) in position. Install four lockwashers and bolts that hold the control valve in position. 6. Install four lockwashers and bolts (5). 7. Fasten a hoist to the console. Weight is 184 lb. (83 kg). Put console (6) in position on the backhoe. Install the four lockwashers and bolts that hold the console in position. Connect tube assemblies as per identification. 8. Put four tube assemblies (8) in position and install nuts (9).9. Connect all tube assemblies (7) to the control valve. Connect the four hydraulic hoses from the stabilizer cylinders. 10. Put cover (10) in position and install the six lockwashers and bolts that hold the cover in position.11. Install the backhoe on the machine. See Special Instructions Form SMHS6867.