COMPRESSOR AS 0R3391 - Caterpillar

Removal Procedure for the Transmission and Bevel Gears
Table 1
Required Tools    
Tool    Part Number    Description    Qty    
A     FT-1952     Axle Removal Tool     1    
B     FT-1897     Adapter     1    
C     138-7575     Link Bracket     2    
D     4C-4089     Transmission Jack     1    
4C-4090 Holding Tool     1    Note: This table represents an improved table for this procedure.
Illustration 1 g00619138
Insert tool (A) into the left final drive by approximately 940 mm (37 inch). Rotate tool (A) by 180 degrees in order to engage the sliding carrier. Then, pull out tool (A) by approximately 25 mm (1 inch), until the sliding carrier is off the bevel gear shaft. Rotate tool (A) backward by 180 degrees in order to disengage the tool from the carrier. Remove the tool from the final drive.Note: The distance for insertion may require an adjustment.