AVSPARE.COM
parts catalog

COMPRESSOR 3237251 - Caterpillar



3237251 COMPRESSOR Caterpillar parts COMPRESSOR
Rating:
61
Alternative (cross code) number:
CA3237251
323-7251
3237251
Caterpillar 3237251 COMPRESSOR
Weight: 15 pounds 7 kg.

Buy COMPRESSOR 3237251 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g03361757
Table 1
Dimensions of Lifting Hook
Part Number of Lifting Hook Working Load Limit (WLL) (L1) Nominal Length of Hook (L2) Total Length of Hook (H) Nominal Height of Hook (B) Nominal Width of Hook (D) Actual Throat Clearance
351-9784 5000 kg (11023 lb) 125 mm (4.92 inch) 185 mm (7.28 inch) 135 mm (5.32 inch) 35 mm (1.38 inch) 35 mm (1.38 inch)
Illustration 2 g06118403
TRS10, TRS14, and TRS18 weld information
Note: The preheat temperature minimum is 150° C (302° F). The interpass temperature maximum is 220° C (428° F),Note: The lifting hook needs to be flush with the end radius.
Table 2
Weld Dimensions on Lifting Hook
Part Number of Lifting Hook Working Load Limit (WLL) Required Weld Dimension
351-9784 5000 kg (11023 lb) 1.5 mm
8 mm Note: Designate a person to inspect the hook frequently. The designated person should inspect the hook prior to operation and during operation. The designated person will determine if the conditions that are found are a hazard. The designated person will determine if a more detailed inspection is required.
Inspect the hook for any distortion such as bends in the hook or twists in the hook.
Inspect the dimensions of the throat (D) of type III hook. An increase in the dimensions of the throat must not exceed 5% of the original dimensions of the throat. Refer to illustration 1 and table 1 for the dimensions of the throat.
Inspect the hook for wear. An increase in the nominal dimensions (B), (H), and (L1) of the type III hook must not exceed 10% of the original nominal dimensions of the hook. Refer to illustration 1 and table 1 for the nominal dimensions of the hook.
Inspect the hook for cracks, nicks, or gouges.
Ensure that the latch properly engages. Inspect the latch for any damage. Ensure that the latch is not malfunctioning.Note: Before continuing to operate the hook, the hook must be repaired or replaced if any of the above conditions exist. Refer to illustration 2 and table 2 for weld information. Contact your Cat dealer for additional information on replacing the lifting hook.


Parts compressor Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.