COMPRESSOR-AIR 4809083 - Caterpillar

Illustration 1 g01228131
Elevator Speed Control - The joystick is located to the right side of the operator seat. The speed of the elevator is controlled by the thumb lever on the top of the joystick. The elevator speed control is set by toggle switch (1). Toggle switch (1) is located on the front side of the joystick.When the elevator is moving, push the toggle switch in order to set the speed of the elevator. A new speed can be set for the elevator by cycling the toggle switch OFF and ON again.While the thumb lever is in the HOLD position, push the toggle switch in order to release the elevator speed.Note: If the engine is still running and you push the toggle switch again, the elevator speed will resume at the last speed that was set for the elevator.Refer to Operation and Maintenance Manual, "Elevator Control (Joystick)" for more information on controlling the elevator.