COMPRESSOR 5P3524 - Caterpillar

1. Remove two bolts (1) and magnet assembly (2) from the lift arm assembly.2. Disconnect wire (4).3. Remove bolts (5) and holder assembly (3) from the front loader frame. 4. Remove two bolts (6) and switch assembly (7) from the holder. The following steps are for the installation of the lift kickout control.5. Put switch assembly (7) in position in the holder. Install bolts (6) that hold the switch in place.6. Put the holder assembly in position, and install bolts (5).7. Connect wires (4).8. Put magnet assembly (2) in position, and install bolts (1).9. Adjust the lift kickout. See "Lift Kickout Adjustment Procedure" in the 950F Wheel Loader Hydraulic System Specifications module, Form No. SENR4931.