COMPRESSOR 5P3526 - Caterpillar

1. Remove bolts (1), and disconnect cover (2) from the tube assembly. 2. Remove clip (3), and disconnect wires (5).3. Remove cover (2) from the machine.4. Loosen the two setscrews, and remove magnet assembly (4) from the pin. 5. Remove bolts (6) that hold the block and the magnet assembly to cover (2). 6. Remove magnet assembly (7) and block (8) from cover (2). The following steps are for the installation of the bucket positioner control.7. Install block (8) and magnet assembly (7) in cover (2) with bolts (6).8. Connect wires (5).9. Install clip (3) that holds wires (5) together.10. Install magnet assembly (4) in the pin, and tighten the two setscrews.11. Put cover (2) in position on the tube assembly, and install bolts (1).12. Adjust the bucket positioner control. See "Bucket Positioner Adjustment Procedure" in the 950F Wheel Loader Hydraulic System Specifications module, Form No. SENR4931.