CONDENSER & MTG GP-REFRIGERANT 1972855 - Caterpillar

Illustration 1 g01770933Note: Use three points of contact when you access the cab filter (fresh air).Reference: See Operation and Maintenance Manual, "Mounting and Dismounting" for more information.
The filter cover (1) is located near the top of the window on the left side of the cab. Loosen three clamps (2) and remove the filter cover .
Remove filter element (3).
Personal injury can result from air pressure.Personal injury can result without following proper procedure. When using pressurized air, wear a protective face shield and protective clothing.Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes.
The filter element can be cleaned by using pressurized air. Use a maximum air pressure of 205 kPa (30 psi). Direct the air from the clean side to the dirty side.
Inspect the element for damage. Inspect the gaskets for damage. Replace damaged filters.
Install filter element (3) and install filter cover (1). Close three clamps (2).Note: Use three points of contact when you install the cab filter (fresh air).Note: Clean the filters more often in dusty conditions.