CONDENSER AS 2298996 - Caterpillar

Illustration 8 g06136572
(33) Battery disconnect switch
(34) VIMS service port
(35) Machine lockout control
(36) Switch for Engine Service Lights
(37) Switch for access lights
(38) Engine shutdown switch
(39) Engine lockout control
(40) Auxiliary start receptacle
(41) Live line indicator
(42) Autonomous/manual mode switch and light (If Equipped)
(43) DEF purge indicator light (Tier 4) (If Equipped)Battery Disconnect Switch (33)
Battery Disconnect Switch (33) - See Operation and Maintenance Manual, "Battery Disconnect Switch".VIMS Service Port (34)
VIMS 3G Service Port (34) - This service port allows service personnel to connect a laptop computer with the software for VIMS.Note: The engine lockout control will allow power to the ECM to provide an active VIMS service port.Machine Lockout Control (35)
Machine Lockout Control (35) - See Operation and Maintenance Manual, "Machine Lockout Control".Engine Service Lights (36)
Engine Service Lights (36) - Move this switch to the ON position to light the engine area.Switch for Access Lights (37)
Switch for Access Lights (37) - Use this switch to turn on or turn off the lighting in the area around the stair assembly.Note: There are two switches that activate these lights. One switch is located in the cab and the other switch is on the ground level controls near the bottom of the stair assembly. The position of one switch will determine whether the other switch is in the ON position or in the OFF position.Engine Shutdown Switch (38)
Engine Shutdown Switch (38) - See Operation and Maintenance Manual, "Engine Shutdown Switch".Engine Lockout Control (39)
Engine Lockout Control (39) - See Operation and Maintenance Manual, "Starter Lockout Control".Auxiliary Start Receptacle (40)
Auxiliary Start Receptacle (40) - See Operation and Maintenance Manual, "Power Receptacle - 24V"Live Line Indicator light (41)
Live line indicator light indicates the status of battery isolation or not.Autonomous/manual mode switch and light (42) (If Equipped)
DEF purge indicator light (Tier 4) (43) (If Equipped)
Cab Visor
Illustration 9 g06277657Cab Visor (44) (If Equipped)
Grasp the handle and pull downward to lower the cab visor for the front window. Hook the cab visor to the brackets at both sides of the front window. The cab visor may be positioned at two different heights.Trolley System Switch (45) (If Equipped)
Illustration 10 g06329889
(45) Trolley system switch (if equipped)
Trolley Engage (45) - Depress the top of the switch to command trolley to engage sequence. The pantographs will raise.
Trolley Disengage (45) - Depress the bottom of the switch to command trolley to disengage sequence. The pantographs will lower and the engine speed will increase.For more information on the Trolley System Switch, refer to Operation and Maintenance Manual, "Operation - Trolley System (If Equipped)".