AVSPARE.COM
parts catalog

CONDITIONER GP 2830590 - Caterpillar


2830590 CONDITIONER GP Caterpillar parts
Rating:
36
Alternative (cross code) number:
CA2830590
283-0590
2830590
Caterpillar 2830590 CONDITIONER GP
Weight: 178 pounds 81 kg.

Buy CONDITIONER GP 2830590 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Putting your hands or face close to the front window could result in injury or death.Putting your hands or feet on the lower front window could result in injury or death.
Park the machine on level ground. Put the lever for the hydraulic lockout control in the LOCKED position.Note: The switch for the power window will not work when the lever for the hydraulic lockout control is in the UNLOCKED position.Operate the switch after parking the machine on level ground.
Illustration 1 g00682497
The switch for the power window is located on the right side instrument panel.
Power Window - The power window can be used to mechanically open the upper window or the power window can be used to mechanically close the upper window.
OPEN - Push down on the top of the switch in order to open the upper window.
CLOSE - Push down on the bottom of the switch in order to close the upper window. The upper window will stop momentarily before the upper window is fully closed, and an alarm will sound. Inspect the area that surrounds the window for blockages. Press the switch again.Push down on the opposite side of the switch in order to stop the window. The window will stop at that point. From that point, push down either end of the switch in order to open or close the window.
Avoid excessive continuous operation of the power window. This will cause the motor to heat up.
Note: The power window will not function while the windshield wiper/washer is being operated.Manually Opening and Closing the Power Window
Consult your Caterpillar dealer if the switch for the power window does not activate the power window. Use the following directions to temporarily open or close the power window.
Illustration 2 g00680973
Remove the handle from the pocket on the back of the operator's seat.
Remove the seal that is located at the back of cab.
Illustration 3 g00680976
Position one end of the handle into the hole. Push the handle into the hole firmly.
To operate the power window, turn the handle.
To close the power window, turn the handle clockwise.
To open the power window, turn the handle counterclockwise.


Parts conditioner Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.