2177173 CONDUIT-FLEXIBLE Caterpillar parts
3412, 3508, 3508B, 3512, 3512B, 3516, 3516B, G3516, PM3508, PM3512, PM3516
Rating:
Alternative (cross code) number:
CA2177173
217-7173
2177173
CA2177173
217-7173
2177173
GEN SET ENGINE, POWER MODULE,
Compatible equipment models: 2177173:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt (1/2 inch - 20 NF by 4 inch) 2
B 138-7575 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01148312
Typical example
Remove the two setscrews and install the Tooling (A) as guides. Note: The weight of the flywheel (2) is approximately 54 kg (119 lb). Install the Tooling (B) in order to support the flywheel (2) before the remainder of the setscrews (1) are removed.
Remove the remaining setscrews (1) that secure flywheel (2) to the crankshaft.
Remove the flywheel (2) from the engine.
Illustration 2 g01148313
Check the condition of the ring gear (4). Remove the ring gear (4) if the ring gear is worn or damaged. Note: Identify the orientation of the ring gear (4) on the flywheel (2) and the position of the chamfer on the teeth for the correct positioning when the new ring gear is installed.
Place the flywheel (2) and the ring gear (4) on a suitable support. Use a hammer and a chisel in order to remove the ring gear (4) from the flywheel (2).
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolt (1/2 inch - 20 NF by 4 inch) 2
B 138-7575 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01148312
Typical example
Remove the two setscrews and install the Tooling (A) as guides. Note: The weight of the flywheel (2) is approximately 54 kg (119 lb). Install the Tooling (B) in order to support the flywheel (2) before the remainder of the setscrews (1) are removed.
Remove the remaining setscrews (1) that secure flywheel (2) to the crankshaft.
Remove the flywheel (2) from the engine.
Illustration 2 g01148313
Check the condition of the ring gear (4). Remove the ring gear (4) if the ring gear is worn or damaged. Note: Identify the orientation of the ring gear (4) on the flywheel (2) and the position of the chamfer on the teeth for the correct positioning when the new ring gear is installed.
Place the flywheel (2) and the ring gear (4) on a suitable support. Use a hammer and a chisel in order to remove the ring gear (4) from the flywheel (2).
Caterpillar parts catalog:
Parts conduit Caterpillar catalog:
2177172
CONDUIT-FLEXIBLE
3412, 3508, 3508B, 3512, 3512B, 3516, 3516B, G3516, PM3508, PM3512, PM3516
3412, 3508, 3508B, 3512, 3512B, 3516, 3516B, G3516, PM3508, PM3512, PM3516
4H5436
CONDUIT
D326F
D326F
2L9969
CONDUIT ASSEM.
D397D
D397D
1L6591
CONDUIT
D342
D342
3L1557
CONDUIT
D375D
D375D
2014334
CONDUIT
PM3412, PM3508, PM3512, PM3516, PMG3516
PM3412, PM3508, PM3512, PM3516, PMG3516
2014333
CONDUIT
PM3412, PM3508, PM3512, PM3516, PMG3516, PP3516
PM3412, PM3508, PM3512, PM3516, PMG3516, PP3516
2056419
CONDUIT
3412C, 3456, 3516C, C13 XQ350, C15, C27, C32, G3406, G3412, G3512E, G3516C, G3516E, G3520C, G3520E, PM3508, PM3512, PM3516, PMG3516, XQC1200, XQC1600
3412C, 3456, 3516C, C13 XQ350, C15, C27, C32, G3406, G3412, G3512E, G3516C, G3516E, G3520C, G3520E, PM3508, PM3512, PM3516, PMG3516, XQC1200, XQC1600
1098855
CONDUIT AS
G3408C, G3412, G3508, G3512, G3516
G3408C, G3412, G3508, G3512, G3516
5N8359
CONDUIT-FLEXIBLE
3508B, 3512, 3512B, 3516, 3516B
3508B, 3512, 3512B, 3516, 3516B
5N8361
CONDUIT-FLEXIBLE
3412, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 963, 973, G3508, G3512, G3516, SR4
3412, 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 963, 973, G3508, G3512, G3516, SR4