CONE-BEARING 1069823 - Caterpillar

Illustration 1 g00824832
Control panel
(1) Advisor II display
(2) Keypad for the Advisor II
(3) "EMERGENCY STOP" button
(4) "ENGINE ON" indicator
(5) "ACTIVE ALARM" indicator
(6) "ENGINE FAILURE" indicator
(7) "MANUAL PRELUBE" switch and "PRELUBE ACTIVE" indicator
(8) Mode control switch
(9) "DESIRED SPEED" potentiometer The features of the control panel are described below.Advisor II
Advisor II is a device which enables the operator to monitor engine operation. The Advisor II receives information from the Electronic Control Module (ECM). The device cannot be used for programming. A screen display and a keypad provide the interface for the operator.
Illustration 2 g00799615
Keypad
Note: At the time of this publication, these keys have no function: "X", "." (period or decimal), check and "0" (zero).The keypad is protected in a sealed membrane. When you press a key, press firmly. When a key is pressed sufficiently, a small red indicator in the upper left corner of the keypad will flash once.When the control panel is powered up, the screen becomes active. To view the options for the display, press the "?" key. Table 1 lists the menu.
Table 1
Menu
1 Status Screen Mode
2 Detonation Levels
3 Ignition Times
4 Burn Times
5 Temperatures
6 Secondary Voltages
7 Not Used
8 Events and Diagnostics
9 Display Setup
? Menu To select an option, press the number on the keypad that corresponds to the selection. To exit the option, press the "?" key or any of the numbered keys. It is not necessary to return to the menu in order to select a different option. When you press a different numbered key, the corresponding option is displayed.Status Screen Mode
Table 2
Status Screen Mode
1 Status Screen Menu
2 Engine Status
3 Air/Fuel Ratio Status
4 Speed Status
5 Pressure Status
6 Temperature Status
7 Misc Status
8 Relay Status
9 Not Used
? Menu Status Screen Menu
Pressing "1" returns the user to the "Menu" screen.Engine Status
The "Engine Status" screen displays basic information about the condition of the engine. Table 3 lists the information that is displayed.
Table 3
Engine Status
Engine Speed RPM Desired Engine Speed Percent Load
Oil Pressure Air Pressure Air Temperature
Oil Temperature Jacket Water Temperature Fuel Correction Air/Fuel Ratio Status
The "Air/Fuel Ratio Status" screen displays the status of parameters that pertain to the air and fuel. The actual data is continuously updated. Table 4 lists the information that is displayed.
Table 4
Air/Fuel Ratio Status
A/F Ratio Desired A/F Ratio Fuel Quality
Air Pressure Desired Air Pressure Specific Gravity
Air Flow Fuel Flow Feedback Status Speed Status
The "Speed Status" screen displays parameters that pertain to the engine speed and some additional parameters. Table 5 lists the information that is displayed.
Table 5
Speed Status
Engine Speed Desired Engine Speed Percent Load
Speed Control Droop Setting Governor Type
Wastegate Command Choke command Fuel Command Pressure Status
The "Pressure Status" screen displays parameters that pertain to the engine pressures. Table 6 lists the information that is displayed.
Table 6
Pressure Status
Fuel Pressure Air Pressure Desired Air Pressure
Oil Pressure Differential Oil Pressure Crankcase pressure
Not Used Jacket Water Not Used Temperature Status
The "Temperature Status" screen dis