CONE-SPECIAL TAPERED 1194133 - Caterpillar

Table 1
Sales Model    Part Number    Sales Model    Part Number    
C4.4     20R-2684     C6.6     20R-2682    
C4.4     20R-2685     C6.6     20R-2683    
C4.4     20R-2686     C6.6     20R-2691    
C4.4     20R-2687     C6.6     20R-2692    
C4.4     20R-2689     C6.6     20R-2698    
C4.4     20R-2690     C6.6     20R-2452    
C4.4     20R-2693     C6.6     20R-2453    
C4.4     20R-2694     C6.6     20R-2454    
C4.4     20R-2695     C6.6     20R-2455    
C4.4     20R-2696            
C4.4     20R-2449            
C4.4     20R-2450            The dealer must remove the plate from the existing engine. The plate will then need to be installed onto the replacement remanufactured engine. Failure to reinstall the plate will result in no oil pressure or low oil pressure. Engine damage will take place if the plate is not installed to the replacement remanufactured engine.
Illustration 1 g03698806
Typical exampleThe plate (2) and bolts (3) will be reused. Ensure that the existing gasket has been removed from the plate. A new gasket (1) must be used when reinstalling the plate. Refer to table 2 for the parts information.
Table 2
Part Number    Description    Qty    
277-2537     Plate     1    
277-2538     Gasket     1    
6I-0260     Bolt     2    
Inspect the surfaces of the remanufactured engine cylinder block for wear or damage.
Install a new gasket (1) to the cylinder block.
Install plate (2) to the cylinder block.
Install bolts (3) to plate (2). Tighten bolts (3) to a torque of 22 N m (16 lb ft).