1210151 CONE-BEARING Caterpillar parts
784B, 785B, 789B, 793B
Rating:
Alternative (cross code) number:
CA1210151
121-0151
1210151
CA1210151
121-0151
1210151
Weight: 8 pounds 3 kg.
TRACTOR, TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Aulligey Rear Left & Right Window Hinges for Nissian Pathfinder 2005-2012 Liftgate Window Glass Tailgate Hinges 90320-ZP40A 90321-ZP40A
Aulligey Replaces OEM Part Number: Replace for 90321-ZP40A, 90320-ZP40A, 90321ZP40A, 90320ZP40A, 90321-EA500, 90320-EA500, 90321EA500, 90320EA500; Package Includes: 1 Pair Rear Window Liftgate Glass Hinge || Fitment: 2005-2012 for Nissan Pathfinder 6 Cyl 4.0L All Trims Rear Window Liftgate Glass Hinge; for 2005-2012 for Nissan Pathfinder 8 Cyl 5.6L All Trims Rear Window Liftgate Glass Hinge || Powerful Function: Installs on the rear liftgate glass of your Nissan Pathfinder and allows the rear window on the tailgate to open. || High Quality: This item has been surface treated for corrosion resistance, will meets or exceeds OEM standards. || Notice: Please check the part number and the fitment to make a confirm if this item will compatible with your car or not before you purchase, Thank you!
Aulligey Replaces OEM Part Number: Replace for 90321-ZP40A, 90320-ZP40A, 90321ZP40A, 90320ZP40A, 90321-EA500, 90320-EA500, 90321EA500, 90320EA500; Package Includes: 1 Pair Rear Window Liftgate Glass Hinge || Fitment: 2005-2012 for Nissan Pathfinder 6 Cyl 4.0L All Trims Rear Window Liftgate Glass Hinge; for 2005-2012 for Nissan Pathfinder 8 Cyl 5.6L All Trims Rear Window Liftgate Glass Hinge || Powerful Function: Installs on the rear liftgate glass of your Nissan Pathfinder and allows the rear window on the tailgate to open. || High Quality: This item has been surface treated for corrosion resistance, will meets or exceeds OEM standards. || Notice: Please check the part number and the fitment to make a confirm if this item will compatible with your car or not before you purchase, Thank you!
Rugged Ridge | Sport Bar Drink Holder, Pair | 12101.51 | Fits 1955-2018 Jeep CJ & Wrangler YJ/TJ/JK
Rugged Ridge Sports Bar Drink Holder: Quickly place a convenient drink holder anywhere along your Jeeps Sport Bars. Padded nylon drink holders attach with quick release 'hook and loop' straps and hold a variety of cups and water bottle sizes || Jeep Sports Bar Cup Holder: Foam insulation keeps your favorite beverage cool in the hot summer sun. Packed in pairs for both front and back seat use || Offroad Accessories: Get serious about off-roading with a variety of tow hooks, hitches and kits that give yourself a way out in sticky situations. We offer winches, recovery gear, tube doors, mirror kits and more accessories || Rugged Ridge Jeep Parts: Count on Rugged Ridge to provide you with proven Jeep parts and accessories like bumpers, lift kits, wheels, interior accessories, floor liners and more for varying Jeep models
Rugged Ridge Sports Bar Drink Holder: Quickly place a convenient drink holder anywhere along your Jeeps Sport Bars. Padded nylon drink holders attach with quick release 'hook and loop' straps and hold a variety of cups and water bottle sizes || Jeep Sports Bar Cup Holder: Foam insulation keeps your favorite beverage cool in the hot summer sun. Packed in pairs for both front and back seat use || Offroad Accessories: Get serious about off-roading with a variety of tow hooks, hitches and kits that give yourself a way out in sticky situations. We offer winches, recovery gear, tube doors, mirror kits and more accessories || Rugged Ridge Jeep Parts: Count on Rugged Ridge to provide you with proven Jeep parts and accessories like bumpers, lift kits, wheels, interior accessories, floor liners and more for varying Jeep models
$22.99
28 Apr 2023
US: Aulligey
Aulligey Rear Left & Right Window Hinges for Nissian Pathfinder 2005-2012 Liftgate Window Glass Tailgate Hinges 90320-ZP40A 90321-ZP40A
Aulligey Replaces OEM Part Number: Replace for 90321-ZP40A, 90320-ZP40A, 90321ZP40A, 90320ZP40A, 90321-EA500, 90320-EA500, 90321EA500, 90320EA500; Package Includes: 1 Pair Rear Window Liftgate Glass Hinge || Fitment: 2005-2012 for Nissan Pathfinder 6 Cyl 4.0L All Trims Rear Window Liftgate Glass Hinge; for 2005-2012 for Nissan Pathfinder 8 Cyl 5.6L All Trims Rear Window Liftgate Glass Hinge || Powerful Function: Installs on the rear liftgate glass of your Nissan Pathfinder and allows the rear window on the tailgate to open. || High Quality: This item has been surface treated for corrosion resistance, will meets or exceeds OEM standards. || Notice: Please check the part number and the fitment to make a confirm if this item will compatible with your car or not before you purchase, Thank you!
Aulligey Replaces OEM Part Number: Replace for 90321-ZP40A, 90320-ZP40A, 90321ZP40A, 90320ZP40A, 90321-EA500, 90320-EA500, 90321EA500, 90320EA500; Package Includes: 1 Pair Rear Window Liftgate Glass Hinge || Fitment: 2005-2012 for Nissan Pathfinder 6 Cyl 4.0L All Trims Rear Window Liftgate Glass Hinge; for 2005-2012 for Nissan Pathfinder 8 Cyl 5.6L All Trims Rear Window Liftgate Glass Hinge || Powerful Function: Installs on the rear liftgate glass of your Nissan Pathfinder and allows the rear window on the tailgate to open. || High Quality: This item has been surface treated for corrosion resistance, will meets or exceeds OEM standards. || Notice: Please check the part number and the fitment to make a confirm if this item will compatible with your car or not before you purchase, Thank you!
Number on catalog scheme:
18
For full view, you need register
Information:
Power Distribution
Illustration 1 g06024026
Water Spray Electrical Schematic
(1) From engine ECM fuse
(2) From machine key switch
(3) From engine controls fuse
(4) Water spray fuse
(5) From machine ECM fuse
(6) Machine ECM
(7) Keypad
(8) Propel lever
(9) Display
(10) Engine ECM
(11) CAN resistor "2"
(12) CAN resistor "1"
(13) Water pump and motor group
(14) Water pump relayWhen the electrical disconnect switch is in the ON position, power is delivered to the engine ECM fuse. Power transfers from engine ECM fuse (1) to terminals
"84"
"85"
"86"of engine ECM (10). The engine ECM is grounded at terminals
"81"
"82"
"83".When the engine start switch is in the ON position, power is available from
engine controls fuse (3)
from machine ECM fuse (5)
from water spray fuse (4).Power from machine key switch (2) provides the wake-up call to machine ECM (6).Power transfers from engine controls fuse (3) to contact "1" and contact "5" of keypad (7). This power also transfers to contact "2" of propel lever (8) and contact "2" of display (9). The keypad is grounded at contact "2". The propel lever and display are each grounded at contact "1".Power transfers from machine ECM fuse (5) to contacts
"2"
"47"
"48"
"49"
"50"of machine ECM (6). The machine ECM is grounded through contact "1".Power transfers from water spray fuse (4) to contact "30" of water pump relay (14).CAN Communication
After machine ECM (6) receives power, the ECM begins to monitor the CAN bus. After engine ECM (10) receives power, the ECM begins to monitor the CAN bus.
Keypad (7)
propel lever (8)
display (9)communicate through a CAN.To prevent data loss in the communication lines, termination resistors are required at the ends of the CAN bus. CAN resistors (11) and (12) act as termination resistors. The CAN resistors absorb unwanted noise in the communication system that can result in abnormal machine operation.Differences in materials along the CAN bus can cause data pulses in the bus to reflect back through the bus. This reflection, also known as "jitter", creates unwanted noise in the CAN bus. Jitter in the communication lines between computers can distort the original data signals. The distortion can result in data loss.Data in the CAN bus can also be contaminated with radio frequency interference (RFI). This interference can be caused by a number of devices that operate on or near the machine. RFI creates noise in the communication lines that can also distort the original data signals and cause data loss.Input Signals
The controls for the water spray system are on propel lever (8) and keypad (7). The microprocessors in the propel lever and the keypad monitor the status of the following control components:
Water spray enable switch
Water spray mode switch
Water spray timer switches
Propel lever position sensorThese components send status information to the machine ECM through the CAN bus.The propel lever position sensor and the water enable switch are integral to propel lever (8). The water spray mode switch and the water spray timer switches are integral to keypad (7).Machine ECM (6) uses the input signal from the water spray enable switch to determine if the operator wishes to use the water spray system. When the engine start
Illustration 1 g06024026
Water Spray Electrical Schematic
(1) From engine ECM fuse
(2) From machine key switch
(3) From engine controls fuse
(4) Water spray fuse
(5) From machine ECM fuse
(6) Machine ECM
(7) Keypad
(8) Propel lever
(9) Display
(10) Engine ECM
(11) CAN resistor "2"
(12) CAN resistor "1"
(13) Water pump and motor group
(14) Water pump relayWhen the electrical disconnect switch is in the ON position, power is delivered to the engine ECM fuse. Power transfers from engine ECM fuse (1) to terminals
"84"
"85"
"86"of engine ECM (10). The engine ECM is grounded at terminals
"81"
"82"
"83".When the engine start switch is in the ON position, power is available from
engine controls fuse (3)
from machine ECM fuse (5)
from water spray fuse (4).Power from machine key switch (2) provides the wake-up call to machine ECM (6).Power transfers from engine controls fuse (3) to contact "1" and contact "5" of keypad (7). This power also transfers to contact "2" of propel lever (8) and contact "2" of display (9). The keypad is grounded at contact "2". The propel lever and display are each grounded at contact "1".Power transfers from machine ECM fuse (5) to contacts
"2"
"47"
"48"
"49"
"50"of machine ECM (6). The machine ECM is grounded through contact "1".Power transfers from water spray fuse (4) to contact "30" of water pump relay (14).CAN Communication
After machine ECM (6) receives power, the ECM begins to monitor the CAN bus. After engine ECM (10) receives power, the ECM begins to monitor the CAN bus.
Keypad (7)
propel lever (8)
display (9)communicate through a CAN.To prevent data loss in the communication lines, termination resistors are required at the ends of the CAN bus. CAN resistors (11) and (12) act as termination resistors. The CAN resistors absorb unwanted noise in the communication system that can result in abnormal machine operation.Differences in materials along the CAN bus can cause data pulses in the bus to reflect back through the bus. This reflection, also known as "jitter", creates unwanted noise in the CAN bus. Jitter in the communication lines between computers can distort the original data signals. The distortion can result in data loss.Data in the CAN bus can also be contaminated with radio frequency interference (RFI). This interference can be caused by a number of devices that operate on or near the machine. RFI creates noise in the communication lines that can also distort the original data signals and cause data loss.Input Signals
The controls for the water spray system are on propel lever (8) and keypad (7). The microprocessors in the propel lever and the keypad monitor the status of the following control components:
Water spray enable switch
Water spray mode switch
Water spray timer switches
Propel lever position sensorThese components send status information to the machine ECM through the CAN bus.The propel lever position sensor and the water enable switch are integral to propel lever (8). The water spray mode switch and the water spray timer switches are integral to keypad (7).Machine ECM (6) uses the input signal from the water spray enable switch to determine if the operator wishes to use the water spray system. When the engine start
Caterpillar parts catalog:
Parts cone Caterpillar catalog:
1072268
CONE-SPECIAL ROLLER BEARING
789, 789B
789, 789B
1072267
CONE-SPECIAL ROLLER BEARING
789, 789B
789, 789B
776C, 776D, 777D
776C
776, 776C, 776D, 777, 777D, 777F, 777G, W330B
776C, 776D, 777, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D, 789
784B, 784C, 785B, 785C, 785D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
784B, 784C, 785B, 785C, 785D, 795F AC, 795F XQ, 797, 797B, 797F
1069824
CONE-BEARING
784B, 785, 785B
784B, 785, 785B
1346082
CONE-SPECIAL
784B, 785, 785B
784B, 785, 785B
784B, 785B, AD40, AD45, AD55, AD55B, AD60, AE40, AE40 II
8E7924
CONE-BEARING
784B, 785, 785B, 789, 789B, 793, 793B
784B, 785, 785B, 789, 789B, 793, 793B