1718706 CONE Caterpillar parts
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
Rating:
Alternative (cross code) number:
CA1718706
171-8706
1718706
CA1718706
171-8706
1718706
Weight: 52 pounds 23 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 1718706:
Number on catalog scheme:
44
For full view, you need register
Information:
Illustration 10 g00888697
Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15) .
Illustration 11 g00887426
Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto shaft (15) .
Illustration 12 g00888710
Install bearing race (18) onto shaft (15) .Note: Bearing race (18) must contact retaining ring (17) .
Illustration 13 g00887405
Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16) .
Place the pump housing into Tooling (A) .
Illustration 14 g02107957
Use Tooling (C) in order to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
The notches in cam plate (20) must align with keys (26). The keys are located in the bottom of the housing of the travel motor.
Illustration 17 g00887355
Install plates (13) and friction discs (14) into the housing.Note: Install the plates and the discs alternately.
Illustration 18 g00887336
Install backup ring (12) and seal (11) onto the brake piston.
Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
Rotate brake piston (8) .
Install brake piston (8) into the housing.Note: Brake piston (8) must be level upon installation. The brake piston must be level in order to prevent damage to the O-ring seals.
Illustration 20 g00887311
Install springs (7) and O-ring seals (6) .
Illustration 21 g00887302
Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate (4), and bearing (5) .
Illustration 22 g00887295
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install head (2) onto the body of the travel motor.Note: During the installation of head (2) onto the travel motor, be careful not to damage the mating surfaces of the components.
Install bolts (1). Tighten bolts (1) to a torque of 177 18 N m (130.5 13.27 lb ft).End By: Install the travel motor.
Cat SIS web machinery list:
Parts cone Caterpillar catalog:
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 345C, 345C L, 345C MH, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5110B, 621G, 621H, 621K, 623G, 623...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 365B, 365B II, 424B, 554, 621K, 623K, 623K LRC, 627K, 627K LRC, 735, 735B, 740, 740B, 77...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 365B, 365B II, 554, 621K, 623K, 623K LRC, 627K, 627K LRC, 735, 735B, 740, 740B, 776D, 77...
1636082
CONE
365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
345B II, 345C, 345C L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L
7Y0825
CONE-BEARING
375, 375 L, 5080
375, 375 L, 5080
1155260
CONE
5230, 5230B
5230, 5230B
1636082
CONE
365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
365B, 365B II, 365C, 365C L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B
1043948
CONE
5110B, 5130, 5130B, 5230, 5230B
5110B, 5130, 5130B, 5230, 5230B
14E, SE60 V XW
0814917
CONE
PS-500
PS-500
8C7756
CONE-BEARING
AP-1200
AP-1200
8C2310
CONE-BEARING
PR-450
PR-450
PR-450
1783004
CONE-BEARING
AD40, AD45, AD45B, AE40, AE40 II
AD40, AD45, AD45B, AE40, AE40 II
2986933
CONE-TAPERED
AD55, AD55B, AD60
AD55, AD55B, AD60
AD30, AD45B, AD55, AD55B, AD60, D11R, D11T