CONE 1753769 - Caterpillar

Illustration 19 g06172771
Remove gear (29).
Illustration 20 g06172772
Use pry bars to remove gear (30).
Illustration 21 g06172773
Remove retaining rings (31).
Illustration 22 g06172774
Use Tooling (E) to remove gears (32).
Illustration 23 g06172775
Illustration 24 g06172776
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (F) to remove bearing locknut (33).
Illustration 25 g06172777
Illustration 26 g06172778
Use Tooling (G) to separate hub (34).
Use Tooling (H) and a suitable lifting device to remove hub (34). The weight of hub (34) is approximately 37 kg (80 lb).
Illustration 27 g06172910
Remove bearing cone (35) from hub (34).
Illustration 28 g06172779
Remove duo-cone seal (36) from hub (34).
Illustration 29 g06172906
Remove bearing cups (37) from hub (34).
Illustration 30 g06173076
Use Tooling (J) to remove spacer (38) and bearing cone (39).
Illustration 31 g06173085
Remove duo-cone seal (40) from spindle (41).
Illustration 32 g06173089
Remove retaining ring (42) from spindle (41).
Use a soft faced hammer to remove shaft assembly (43) from the opposite side on spindle (41).
Illustration 33 g06173098
Remove retaining ring (44) and roller bearing (45) from shaft assembly (43).