CONE 1979466 - Caterpillar

Features
* Reduces or eliminates alteration of cab wiring.* Unnecessary to alter cab throttle position system to disable cab throttle pedal.* Can be programmed for operation at one speed, two speeds, or variable rpm control.* Remote second throttle sensor input for variable rpm control.* PTO Switch On Lamp to indicate operation in Dedicated PTO Mode.
Customer Programmable Parameter Options
* PTO Configuration - determines how ECM interprets inputs used for Dedicated PTO.* PTO Top Engine Limit - top rpm limit for PTO.* PTO Engine RPM Set Speed - provides PTO engine rpm set point for one or two speed control.* PTO Set Speed - requires only one circuit to provide one speed control.* PTO Cab Throttle RPM Limit - provides parameter to limit cab throttle sensor rpm during PTO operation.* PTO Activates Cooling Fan - program for the fan to come on and remain on during PTO operation.* Torque Limit - reduces engine torque during PTO operation or when Torque Limit Switch is on.* Idle/PTO Mode Vehicle Speed Limit - determines the vehicle speed operating range for PTO.* Idle /PTO RPM Ramp Rate - determines the rate of engine rpm acceleration/deceleration for PTO.* Idle/PTO Bump RPM - determines the amount of rpm change when the Set/Resume switch is toggled.
Additional Features
* When PTO ON/OFF circuit is in the ON position, ECM controlled engine retarder/brakes are disabled.* When PTO On/Off circuit is in the ON position, the Idle Shutdown feature is disabled.* Prevents the cab clutch and service brake inputs from disengaging an engine set speed for slow moving operations requiring engine rpm control from the cab, such as curb pouring cement trucks.* Eliminates false logging of Loss of Vehicle Speed diagnostic (Fault) code during high PTO load conditions.