CONE-BEARING 3655641 - Caterpillar

Illustration 1 g01114329
Insert the key and turn the battery disconnect switch clockwise to the ON position. The battery disconnect switch is located on the left side of the machine and inside the rear compartment. The battery disconnect switch is located next to the fuel tank.
Illustration 2 g01116047
Insert the key and turn main power switch (2) clockwise to the ON position. Main power switch (2) is located on the main center console.
Illustration 3 g01116048
Illustration 4 g01127261
Locate the screed hoist controls (3). There are two screed hoist controls (3) on the machine. One control is located on the left operator station (4) and one control is located on the right operator station (5) .
Move both screed hoist controls (3) to the center HOLD position.
Move screed counterbalance control (1) upward to the ON position. Screed counterbalance control (1) is located on the main center console.
Move both switches for the screed hoist control (3) to the DOWN position. This will lower the screed.
Once the screed is completely lowered, move either one of the screed hoist controls (3) back to the center HOLD position. The other screed hoist control should remain in the DOWN position.
Move screed counterbalance control (1) downward to the OFF position.