CONE-BEARING 5P5320 - Caterpillar

Illustration 1 g03391587
Lift arm positioner switch locationLift arm positioner switch (1) is located in the operator station. When lift arm positioner switch is pressed, power is supplied to magnetic switch (2).
Illustration 2 g02995838
Indicator light above lift arm positioner keypad switch.A- LightPush switch (1) in order to activate the lift arm positioner mode. Indicator (A) will illuminate. Push switch (1) again to disable the ride control. Indicator (A) will go out.
Illustration 3 g02983270
(2) Magnetic switch (3) MagnetMagnetic switch (2) is located on the loader frame. Magnet (3) is located on the lift arm. Moving the joystick control lever to the LOWER position moves the lift arms downward. As the lift arms move downward, magnet (3) passes the magnetic switch (2). The magnetic switch closes.
Illustration 4 g03366231
Location of the lift arm positioner valve (4) behind the guard.
Illustration 5 g03334901
Lift arm positioner valve locationLift arm positioner valve (4) is located on the loader frame forward of the articulation. When magnetic switch (2) closes, power is supplied to lift arm positioner valve (4). The lift arm positioner valve closes.Lift arm positioner valve (4) controls the flow of pilot oil to and from the main control valve. When the lift arm positioner valve closes, pilot oil from the main control valve is sent to the hydraulic tank through an orifice. The lift spool in the main control valve gradually returns to the CENTER position. The lift arms will come to a controlled stop.The height at which the lift arms come to rest can be varied by adjusting the position of magnetic switch (2). Moving the magnetic switch upwards will raise the lift arm height. Moving the magnetic switch downwards will lower the lift arm height.