CONE 5P8344 - Caterpillar

Machine Walk-Around Inspection
SMCS CODE: 1000; 7000For maximum service life of the machine, make a thorough walk-around inspection before mounting the machine or starting the engine. Remove the steering frame lock link and store in unlocked position as shown. The steering frame lock link must be disconnected to steer the machine.Look around and under the machine for items such as loose or missing bolts, rubbish buildup, oil, coolant or fuel leaks, broken or worn parts. Inspect the condition and inflation of tires. Inspect the condition of the bucket and the hydraulic components.Remove any rubbish and debris. Adjust tire inflation as needed. Have any necessary repairs made, loose connections and parts tightened to their specified torques and any missing parts replaced before starting the engine or operating the machine.Check all of the oil, coolant and fuel levels.Refer to Walk-Around Inspection in the Maintenance Section for detailed walk-around inspection information.Mounting the Machine
SMCS CODE: 7000Mount the machine only where steps and/or handholds are provided.Inspect and where necessary, clean and have repairs made to steps and handholds before mounting. Face the machine when mounting.Maintain a three-point contact (two feet and one hand or one foot and two hands contact) with the steps and handholds.Seat and Seat Belt Checks
SMCS CODE: 7312-535; 7324-535; 7327-535 Adjust the seat at the beginning of each shift or when changing operators.Adjust the seat to allow full travel of the pedals when the operator is seated against the seat back.Inspect the belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight.Fasten the seat belt before starting the engine.