CONE-BEARING 8C6600 - Caterpillar

1. Remove four self locking bolts (1) and the washers from seat (2). Slide seat (2) out to gain access to the wire harness. 2. Disconnect wire harness (3) at the electrical connection. 3. Using two people position seat (2) as shown. Using a suitable lifting device and a hoist, remove seat (2) from platform assembly (4). The weight of seat (2) is 57 Kg (125 lb). The following steps are the installation of the seat.4. Using a hoist and a suitable lifting device, position seat (2) to platform assembly (4) as shown. Using two people, install seat (2) to platform assembly (4). The weight of seat (2) is 57 Kg (125 lb).5. Connect wire harness (3) at the electrical connection.6. Install the washers and four self locking bolts (1) to seat (2).