CONE-ROLLER BEARING 9W5447 - Caterpillar

C3.3 engines are designed for the following applications: machine and industrial mobile equipment. The engines are available in the following types of aspiration:
Turbocharged
Naturally aspiratedEngine Specifications
Note: The front end of the engine is opposite the flywheel end of the engine. The left and the right sides of the engine are determined from the flywheel end. The number 1 cylinder is the front cylinder.
Illustration 1 g01222531
A typical example of the layout of the valves
(A) Inlet valves
(B) Exhaust valves
Table 1
C3.3 Industrial Engine Specifications
Number of Cylinders 3 In-Line
Bore 105 mm (4.134 inch)
Stroke 127 mm (5.0 inch)
Aspiration Turbocharged
Naturally aspirated
Compression Ratio T 18.25:1
NA 19.25:1
Displacement 3.3 L (201 in3)
Firing Order 1 2 3
Rotation (flywheel end) Counterclockwise
Valve Lash Setting (Inlet) 0.20 mm (0.008 inch)
Valve Lash Setting (Exhaust) 0.45 mm (0.018 inch) Engine Cooling and Lubrication
The cooling system consists of the following components:
Gear-driven centrifugal water pump
Water temperature regulator which regulates the engine coolant temperature
Gear-driven oil pump (gear type)
Oil cooler (if equipped)The engine lubricating oil is supplied by a gear-driven pump. The engine lubricating oil is cooled and the engine lubricating oil is filtered. Bypass valves provide unrestricted flow of lubrication oil to the engine parts when oil viscosity is high. Bypass valves can also provide unrestricted flow of lubrication oil to the engine parts if the oil cooler should become plugged or if the oil filter element should become plugged.Engine efficiency, efficiency of emission controls, and engine performance depend on adherence to proper operation and maintenance recommendations. Engine performance and efficiency also depend on the use of recommended fuels, lubrication oils, and coolants. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for more information on maintenance items.Engine Service Life
Engine efficiency and maximum utilization of engine performance depend on the adherence to proper operation and maintenance recommendations. In addition, use recommended fuels, coolants and lubricants. Use the Operation and Maintenance Manual as a guide for required engine maintenance.Expected engine life is generally predicted by the average power that is demanded. The average power that is demanded is based on fuel consumption of the engine over a period of time. Reduced hours of operation at full throttle and/or operating at reduced throttle settings result in a lower average power demand. Reduced hours of operation will increase the length of operating time before an engine overhaul is required.