9W7095 CONE-BEARING Caterpillar parts
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
Rating:
Alternative (cross code) number:
CA9W7095
9W-7095
9W7095
CA9W7095
9W-7095
9W7095
Weight: 44 pounds 20 kg.
TRACTOR, TRUCK,
This part in 2 request:
Show.
This information for suppliers only!
2021-01-20
2017-10-03
Compatible equipment models: 9W7095:
Number on catalog scheme:
36
For full view, you need register
Information:
Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes.
Open the left access door and turn the battery disconnect switch to the OFF position.
Illustration 1 g03711840
Open access door (1) .
Illustration 2 g03711918
Disconnect hose assemblies (7), (8), and (9) from gear motor (4) .
Remove the four bolts, the four washers, the two clamps, and hose assembly (5) from gear motor (4) .
Remove the four bolts, the four washers, the two clamps, and hose assembly (6) from gear motor (4) .
Attach a suitable lifting device to gear motor (4). The weight of gear motor (4), the fan shroud, and the fan blade assembly is approximately 35 kg (77 lb).
Remove six bolts (2), the six washers, gear motor (4), the fan shroud, and the fan blade assembly.
Illustration 3 g03711998
Remove nut (12), the washer, fan adapter (11), and fan blade assembly (10) from gear motor (4) .
Illustration 4 g03712019
Remove the two bolts, the two washers, gear motor (4) from fan shroud (13) .Installation Procedure
Install gear motor (4) in the reverse order of removal.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes.
Open the left access door and turn the battery disconnect switch to the OFF position.
Illustration 1 g03711840
Open access door (1) .
Illustration 2 g03711918
Disconnect hose assemblies (7), (8), and (9) from gear motor (4) .
Remove the four bolts, the four washers, the two clamps, and hose assembly (5) from gear motor (4) .
Remove the four bolts, the four washers, the two clamps, and hose assembly (6) from gear motor (4) .
Attach a suitable lifting device to gear motor (4). The weight of gear motor (4), the fan shroud, and the fan blade assembly is approximately 35 kg (77 lb).
Remove six bolts (2), the six washers, gear motor (4), the fan shroud, and the fan blade assembly.
Illustration 3 g03711998
Remove nut (12), the washer, fan adapter (11), and fan blade assembly (10) from gear motor (4) .
Illustration 4 g03712019
Remove the two bolts, the two washers, gear motor (4) from fan shroud (13) .Installation Procedure
Install gear motor (4) in the reverse order of removal.
Cat SIS web machinery list:
Parts cone Caterpillar catalog:
627, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 776C, 776D, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793B, D364, D375D, D397D, D7F
120B, 12E, 12F, 140B, 14E, 611, 615, 615C, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793B, 793C, 793D, 814F, 814F II, 834B, 834G, 834H, 834K, 836G, 836H, 836K, 938H, 941, 951B, 966F, 966F II...
143H, 14G, 14H, 14H NA, 14M, 163H, 163H NA, 16G, 16H, 16H NA, 16M, 225, 227, 229, 229D, 231D, 515, 517, 525, 525B, 527, 535B, 545, 57, 578, 58, 594H, 611, 615, 615C, 621, 621B, 621E, 621F, 621G, 621H,...
235C, 235D, 245B, 777G, 785D, D6H, D6H XL, D6H XR, D6R
589, 784B, 785, 785B, D10N, D10R, D10T, D10T2, D8L, D9L, D9N
16M, 589, 784B, 784C, 785B, 785C, 785D, 844, 844H, 844K, 854G, 854K, 966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K, 990, 990 II, 990H, 990K, 992C, 992G, 992K, 993K, D10R, D10T, D9R, IT38G II
769C, 769D, 771C, 771D, 772, 773, 773B, 773D, 775B, 775D, 776, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C
784B, 784C, 785, 785B, 785C, 785D, 789
776C, 776D, 777, 777B, 777D, 777F, 777G, 784B, 784C, 785, 785B, 785C, 785D, 789
784B, 784C, 785B, 785C, 785D, 795F AC, 795F XQ, 797, 797B, 797F
784B, 784C, 785B, 785C, 785D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
784B, 785B, 793B, 793C
784B, 784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C
789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
574, 824B, 988
1262522
CONE-SPECIAL ROLLER BEARING
814B, 815B, 816B, 966D, AD45B, AD55, AD55B, AD60
814B, 815B, 816B, 966D, AD45B, AD55, AD55B, AD60
8E7920
CONE-SPECIAL ROLLER BEARING
789, 789B
789, 789B
784B, 784C, 785, 785B, 785C, 785D, 789
769C, 769D, 771C, 771D, 772, 773, 773B, 773D, 775B, 775D, 776, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C
1352666
CONE-SPECIAL
793C
793C