CONFIGURATION AR 3289870 - Caterpillar

Always use a designated pump for oil sampling, and use a separate designated pump for coolant sampling. Using the same pump for both types of samples may contaminate the samples that are being drawn. This contaminate may cause a false analysis and an incorrect interpretation that could lead to concerns by both dealers and customers.
Obtain the sample of the coolant from surge tank as close as possible to the recommended sampling interval. In order to receive the full effect of S O S analysis, establishing a consistent trend of data is necessary. In order to establish a pertinent history of data, perform consistent samplings that are evenly spaced. Supplies for collecting samples can be obtained from your Cat dealer.Level 1 Analysis
Always use a designated pump for oil sampling, and use a separate designated pump for coolant sampling. Using the same pump for both types of samples may contaminate the samples that are being drawn. This contaminate may cause a false analysis and an incorrect interpretation that could lead to concerns by both dealers and customers.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Note: Obtaining a Coolant Sample (Level 1) is not necessary if the cooling system is filled with Cat ELC (Extended Life Coolant). Cooling systems that are filled with Cat ELC should have a Coolant Sample (Level 2) that is obtained at the recommended interval that is stated in the Maintenance Interval Schedule.Note: Obtain a Coolant Sample (Level 1) if the cooling system is filled with any other coolant instead of Cat ELC. This sampling includes the following types of coolants.
Commercial long life coolants that meet the Caterpillar Engine Coolant Specification -1 (Caterpillar EC−1)
Cat Diesel Engine Antifreeze/Coolant (DEAC)
Commercial heavy-duty antifreeze/coolantTesting the coolant can be done at your Cat dealer. Caterpillar S O S Coolant Analysis is the best way to monitor the condition of your coolant and your cooling system. Perform a Coolant Analysis (Level 1) at 250 hours for systems that do not contain extended life coolant (ELC).Note: Level 1 results may indicate a need for Level 2 Analysis.
Shut off the engine. Make sure that the engine fan blades stop rotating.
Illustration 1 g03799444
Some components have been removed for clarity
Open the left engine compartment door (not shown). Unlock top access door (1) that is inside the engine compartment. Remove filler cap (2) to take the coolant sample.
Use the following guidelines for proper sampling of the coolant:
Complete the information on the label for the sampling bottle before you begin to take the samples.
Keep the unused sampling bottles stored in plastic bags.
Keep the lids on empty sampling bottles until you are ready to collect the sample.
Place the sample