CONFIGURATION 4724944 - Caterpillar

Illustration 1.2. Remove four bolts that fasten the left fender to the rear of the cab. See Illustration 2.
Illustration 2.3. Remove clips that fasten the hoses to the cab. See Illustration 3.
Illustration 3.4. Disconnect the steering linkage and hose shown in Illustration 4.
Illustration 4.5. Remove the tilt support brace for the cab from its storage position shown in Illustration 5.
Illustration 5.6. Remove governor control cable clip from the side of the cab. Remove hose clip and remove the two mounting bolts closest to the engine compartment. See Illustration 6.
Illustration 6.7. Fasten a hoist to the top of the cab. See Illustration 7.
Illustration 7.8. Tilt the cab with the hoist and install the support brace as shown in Illustration 8.
Illustration 8.9. Disconnect the hoist.To lower the cab, repeat the preceding steps in reverse order.