CONFIGURATION 4790926 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
B     1U-9200     Lever Puller Hoist     3    
C     5P-2706     Chain Clamp Assembly     2    
D     1U-9202     Lever Puller Hoist     1    
Park the machine on a hard, level surface. Lower the scraper bowl to the ground and engage the parking brake. Chock the wheels in order to prevent the machine from moving.
Illustration 1 g01074247
Install Tooling (D) onto the lower elevator flight.
Illustration 2 g00799392
Attach a hoist with a suitable lifting device to the top elevator flight. Get the elevator chain started onto the elevator drive sprockets.
Illustration 3 g00799407
Attach two of Tooling (B) to the top elevator flight.
Use Tooling (B) to pull the elevator chain downward.Note: The suitable lifting device should remain on the elevator flight until the elevator flight is completely over the elevator drive sprockets.
Illustration 4 g01074292
Install a suitable lifting device, as shown. Remove Tooling (D) .
Illustration 5 g01074293
Install Tooling (D) onto the two loose elevator flights. Tighten Tooling (A) until you can fit Tooling (C) onto the two loose ends of the chain.
Illustration 6 g00799489
Install Tooling (C) in order to pull the chain together.
Use Tooling (C) to connect the link assemblies to the elevator chain.
Illustration 7 g01074139
Install drive pin (6). Remove Tooling (C) .
Illustration 8 g01074131
Attach a suitable lifting device onto flight (3). The weight of flight (3) is approximately 63 kg (139 lb).
Position flight (3) and install bolts (4) .
Illustration 9 g01074130
Attach a suitable lifting device onto guard assembly (1). The weight of guard assembly (1) is approximately 75 kg (165 lb).
Position guard assembly (1) and install bolts (2) .