CONNECTION GP-EXHAUST 2577276 - Caterpillar

Location of components. (1) 1059772 Shaft. (2) 1064497 Gear Assembly.Installation Procedure
1. Install the new shaft (1). Drive the pilot of the shaft into the cylinder block until the plate contacts the cylinder plate.2. Install the 0S1594 Bolts with 5M2894 Washers. DO NOT use the 5S7611 Lock. See the Reference. Tighten the bolts to a torque of 45 N m (35 lb ft). Tighten the nut to a torque of 25 N m (20 lb ft).3. Tap the end of the new shaft with a soft hammer four or five times. Then tighten the two bolts and one nut to the correct torque again.4. Install the new gear assembly and the 8N4960 Thrust Plate.