CONNECTION GP-GENERATOR LEADS 2995907 - Caterpillar

Illustration 1 g00419038
The machine control pattern can be varied by changing the hydraulic hose connections. Consult your Caterpillar dealer for the procedure.
Illustration 2 g00101278
The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left control lever and the pattern on the right pertains to the right control lever.
Stick Out (1) - Move the control lever to this position in order to move the stick outward.
Swing Right (2) - Move the control lever to this position in order to swing the upper structure to the right.
Stick In (3) - Move the control lever to this position in order to move the stick inward.
Swing Left (4) - Move the control lever to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the control lever to this position in order to lower the boom.
Bucket Dump (6) - Move the control lever to this position in order to dump the bucket.
Boom Raise (7) - Move the control lever to this position in order to raise the boom.
Bucket Close (8) - Move the control lever to this position in order to close the bucket. HOLD (9) - When you release the control levers from any position, the control levers will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a control lever diagonally.If the machine is equipped with a hydraulic hammer, the function of position (6) and of position (8) is different.Hydraulic Hammer Raise (6) - Move the control lever to this position in order to raise the hydraulic hammer.Hydraulic Hammer Lower (8) - Move the control lever to this position in order to lower the hydraulic hammer.