CONNECTION GP-ELECTRICAL 3721921 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1 Start By:
Remove the vibration damper and the pulley. Refer to Disassembly and Assembly, "Vibration Damper and Pulley - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01044861
Use Tooling (A) or a punch and hammer in order to puncture three or more holes in wear sleeve (2).
Use Tooling (A) to remove the wear sleeve.
Use Tooling (A) or a punch and hammer in order to puncture three or more holes in crankshaft front seal (1).
Use Tooling (A) to remove the crankshaft front seal.