4W5864 CONNECTION-FEED Caterpillar parts
206, 212, 416B, 428, 428B, AP-1200, CP-433B, CS-431B, RT50
Rating:
Alternative (cross code) number:
CA4W5864
4W-5864
4W5864
CA4W5864
4W-5864
4W5864
Weight: 0.05 pounds 0 kg.
ASPHALT PAVER, VIBRATORY COMPACTOR,
Compatible equipment models: 4W5864:
Number on catalog scheme:
8
For full view, you need register
Information:
Removal Procedure
Start By:
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
High hydraulic system pressure. To avoid personal injury, do not remove any hydraulic system lines, taps, or parts until all pressure has been relieved.
Disconnect any attachment tools from the quick coupler assembly.
Illustration 1 g01066088
Fasten a suitable lifting device onto quick coupler (2) .
Disconnect hose assemblies (1) from quick coupler (2) .
Illustration 2 g01066090
Illustration 3 g01066099
Note: Note the location of washers (7) and (8) for assembly purposes.
Remove bolts (4), the washers, the spacers, and pin assemblies (3) from both sides of the quick coupler.
Remove bolts (5), the washers, the spacers, pin assemblies (6), and washers (7) and (8) from both sides of the quick coupler.
Remove the quick coupler from the machine. The weight of the quick coupler is approximately 156 kg (344 lb).Installation Procedure
Table 1
Tools Needed
Tool Part Number Part Description Qty
A 5P-0960 Molybdenum Grease Note: Ensure that the pin assemblies slide freely in the pin bores before assembly. Lubricate all the pin bores and the pin assemblies with Tooling (A) .
Use a suitable lifting device to position the quick coupler. Align the four pin bores. The weight of the quick coupler is approximately 156 kg (344 lb).
Illustration 4 g01065911
Illustration 5 g01066090
Install washers (7) and (8) and pin assemblies (6) in the pin bores on each side of the quick coupler. Make sure that washers (7) and (8) are installed in the original locations. If any parts have been replaced, add or subtract washers (7) and (8) so that the lift arms and lever assemblies are centered in the quick coupler. Install bolts (5), the washers, and the spacers.
Install pin assemblies (3), bolts (4), the washers, and the spacers onto both sides of the quick coupler.
Illustration 6 g01066088
Connect hose assemblies (1) onto quick coupler (2) .
Start By:
Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
High hydraulic system pressure. To avoid personal injury, do not remove any hydraulic system lines, taps, or parts until all pressure has been relieved.
Disconnect any attachment tools from the quick coupler assembly.
Illustration 1 g01066088
Fasten a suitable lifting device onto quick coupler (2) .
Disconnect hose assemblies (1) from quick coupler (2) .
Illustration 2 g01066090
Illustration 3 g01066099
Note: Note the location of washers (7) and (8) for assembly purposes.
Remove bolts (4), the washers, the spacers, and pin assemblies (3) from both sides of the quick coupler.
Remove bolts (5), the washers, the spacers, pin assemblies (6), and washers (7) and (8) from both sides of the quick coupler.
Remove the quick coupler from the machine. The weight of the quick coupler is approximately 156 kg (344 lb).Installation Procedure
Table 1
Tools Needed
Tool Part Number Part Description Qty
A 5P-0960 Molybdenum Grease Note: Ensure that the pin assemblies slide freely in the pin bores before assembly. Lubricate all the pin bores and the pin assemblies with Tooling (A) .
Use a suitable lifting device to position the quick coupler. Align the four pin bores. The weight of the quick coupler is approximately 156 kg (344 lb).
Illustration 4 g01065911
Illustration 5 g01066090
Install washers (7) and (8) and pin assemblies (6) in the pin bores on each side of the quick coupler. Make sure that washers (7) and (8) are installed in the original locations. If any parts have been replaced, add or subtract washers (7) and (8) so that the lift arms and lever assemblies are centered in the quick coupler. Install bolts (5), the washers, and the spacers.
Install pin assemblies (3), bolts (4), the washers, and the spacers onto both sides of the quick coupler.
Illustration 6 g01066088
Connect hose assemblies (1) onto quick coupler (2) .
Caterpillar parts catalog:
Parts connection Caterpillar catalog:
206, 212, 3054, 3054B, 3056, 3056E, 307, 312, 312B L, 312C, 315, 315B L, 317, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564,...
2W1237
CONNECTION
426, 428, AP-800, CB-424, CS-323, CS-431B
426, 428, AP-800, CB-424, CS-323, CS-431B
416, 426, 428
7W6263
CONNECTION
416, 428, 436, AP-800, CS-431B
416, 428, 436, AP-800, CS-431B
7W6261
CONNECTION-FUEL
416, 428, 436, AP-800, CB-424, CS-323, CS-431B, PR-75
416, 428, 436, AP-800, CB-424, CS-323, CS-431B, PR-75
7W6257
CONNECTION-STRAIGHT
416, 428, 436, AP-800, CB-424, CS-323, CS-431B, PR-75
416, 428, 436, AP-800, CB-424, CS-323, CS-431B, PR-75
4P9875
CONNECTION
RT50
RT50
7C1255
CONNECTION
3056, AP-1200
3056, AP-1200
7W1194
CONNECTION
206, 212
206, 212
3N6585
CONNECTION GP-WATER
D379A, D398A, D399
D379A, D398A, D399
3054, 3054B, 3056, 312B L, 312C, 315B L, 416C, 416D, 420D, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 924G, 924GZ, AP-800C, BG-225B, BG-225C, CB-434C, CB-534C, CB-535B, CP-4...
3054, 3054B, 3056, 307, 312, 312B L, 315, 317, 554, 914G, AP-800C, BG-225B, BG-225C, C2.2, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-544, CB-545, CP-433C, CS-323C, CS-431C, CS-433C, IT14G, PF-29...
1142590
CONNECTION
3054, 3054B, 312, 312B L, 312C, 315, 315B L, 317, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 914G, AP-800C, BG-225B, BG-225C, CB-534C, CB-535B, CP-433C, CP-433E,...
3054, 3054B, 312, 312B L, 312C, 315, 315B L, 317, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, 908, 914G, AP-800C, BG-225B, BG-225C, CB-534C, CB-535B, CP-433C, CP-433E,...
3054, 3054B, 908, AP-800C, BG-225B, TH103, TH210, TH215, TH350B, TH355B, TH460B, TH62, TH63, TH82, TH83
3054, 3054B, 312B L, 315B L, AP-800C, BG-225B, TH103, TH62, TH63, TH82, TH83
206, 212, 3054, 3054B, 3056, 3056E, 307, 312, 312B L, 312C, 315, 315B L, 317, 416B, 416C, 416D, 420D, 424D, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 554, 560B, 564,...