CONNECTION GP-WATER 5088420 - Caterpillar

Illustration 1 g01473152
Press the down arrow key or the up arrow key until "Units" is highlighted. Refer to Illustration 1.
Press the "OK" key. By default, the "Distance Units" dialog is selected. The dialog in Illustration 2 appears.
Illustration 2 g01379358
Do the following as necessary from any of the "Units" dialogs.
Press the "Distance" soft key in order to select the distance units.
Press the "Speed" soft key in order to select the speed units.
Press the "Grade" soft key in order to select the grade units.
Press the "Cross Slope" soft key in order to select the cross slope units.
Press the "Station Format" soft key in order to select the station (chainage) format for a road design.
Press the "ESC" key in order to cancel and return to the "Setup Menu - Installation" dialog.
When any or all of the units have been set, press the "OK" key in order to save the settings and return to the "Setup Menu - Installation" dialog. You can begin to enter details such as the machine dimensions, in those units immediately.
Press the "ESC" key in order to exit the "Setup Menu - Installation" dialog.The "Units" are saved in the "Display Settings" file.Distance
Distance values appear on the screen in the following formats.
Meters - as "m" (default for all display firmware files except for US English)
International feet - as "ft"
US survey feet - as "FT" (default for US English display firmware)Perform the following steps in order to change the distance units.
If any other unit setup dialog is shown, press the "Distance" soft key.
Use the down arrow key and the up arrow key in order to choose the required distance units.
The DXF file format does not contain any information on the units used (feet or meters). As all DXF drawing files are unitless, use the AccuGrade Office software in order to ensure that the correct units are set.
Note: If you change your units, any currently displayed "Site Map" and "Background Plan" files are reloaded. Then the "Site Map" and "Background Plan" files are displayed in the new units.Speed
Speed can be shown in the following formats.
Kilometers per hour - as "km/h" (default for all Display firmware files except for US English)
Miles per hour - "mph"Perform the following steps in order to change the speed units.
Press the "Speed" soft key .
Use the down arrow key and the up arrow key in order to choose the required units.Grade
Grade values can be shown in the following formats:
Percentage - as "%"
Ratio - as "rise: run" (default)Perform the following steps in order to change the grade units.
Press the "Grade" soft key .
Use the down arrow key and the up arrow key in order to choose the required format.Cross Slope
Cross slope values can be shown in the following formats:
Percentage - as "%" (default)
Ratio - as "rise: run"Perform the following steps in order to change the cross slope units.
Press the "Cross Slope" soft key .
Use the down arrow key and the up arrow key in order to choose the required format.A positive value indicates a rising cross slope as you move