CONNECTOR 0930615 - Caterpillar

Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Personal injury or death can result from improperly checking for a leak.Always use a board or cardboard when checking for a leak. Escaping air or fluid under pressure, even a pin-hole size leak, can penetrate body tissue causing serious injury, and possible death.If fluid is injected into your skin, it must be treated immediately by a doctor familiar with this type of injury.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Required Parts
Table 1
439-6783 Auxiliary Control Ar (- 01)
Qty Part No. Description Media
(1) 239-8695 Hydraulic Pedal Control Gp GEHS0049
(1) 247-7416 Film Gp -
(1) 247-7424 Film Gp -
(1) 251-0529 Cab Wiring Gp GEHS0050
(1) 255-1802 Pilot Lines Gp GEHS0249
(1) 255-5713 Control Valve and Mounting Gp GEHS0212
(1) 288-7022 Film -
(1) 369-0239 Combined Flow Wiring Gp GEHS0568
(1) 376-6316 Pilot Lines Gp GEHS0569
(1) 376-6317 Front Lines Gp GEHS0570
(1) 376-6336 Pilot Lines Gp GEHS1006 Reference Section
Set the machine tool control system.
Reference: Excavator Tool Control System, RENR7389, "Testing and Adjusting Section", "Machine Tool Control System - Select"Set tool flows and pressures.
Reference: Excavator Tool Control System, RENR7389, "Testing and Adjusting Section", "Process for Setting Up the Work Tool"Principles of Operation
Reference: Excavator Tool Control System, RENR7389, "Systems Operation Section", "System 11: Combined Function"Reference: Excavator Tool Control System, RENR7389, "Systems Operation Section", "Medium Pressure Hydraulic System"Serial Number Identification
Caterpillar Work Tools hydraulic kits are identified with serial numbers. The serial number is printed on a film group (1). This film group should be placed on the right-hand window inside the cab.
Illustration 2 g03374483
Illustration 3 g03374485