CONNECTOR 1429117 - Caterpillar

Rotation Hazard (9)
This message is at four locations around the upper chassis.
Illustration 11 g06176143Hazard prevention for persons present in the work area of the machine, and especially in the upper frame rotation and travel areas, both on road and on rail.Emergency Stop Button (10)
Indication of the emergency stop button location. Message is located around the button, on the right console of the operator cab. Also on the control desk inside the second cab.
Illustration 12 g06176146Brake System Release (11)
This message is on the rear of the chassis.
Illustration 13 g06176149Indication of the location of the manual pump, enabling, in backup mode, to release the brakes on the railway axles to allow towing of the machine on railway tracks.Emergency Mode Security Seal (12)
This message is inside cab on the left lock-fitted box for the "Smart Control System".
Illustration 14 g06176155Message relates to the use of the key to deactivate the parameters of the Smart Control System. To access the key, the seal must be removed. In this case, the seal reveals the word "VOID / OPEN". This seal enables the safety technician to check if the emergency mode has been used.Emergency Mode Operation (13)
This message is inside cab on the left lock-fitted box for the "Smart Control System".
Illustration 15 g06176159In backup mode, indication of how to use of the key that fully deactivates the limitations defined by the Smart Control System configuration.Attention to Overhead Lines (14)
Depending on the railway regulations in the country of use, the following message could be present. This message is on the inside right window of the cab.
Illustration 16 g06322691
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. On road, stay clear 3 m (10 ft) plus twice the line insulator length. On rail, set height limitation according to prevention plan of the work site before on-tracking the machine when operating the vehicle under live overhead lines. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death.
Rated Lifting Capacity Chart (15)
This chart is located in the operator cab.
Illustration 17 g06262047This lifting table provides general lifting capacities at the tool point for the machine in rail mode. For full lifting information and configuration, on road or rail, at tool point or auxiliary lifting point, refer to Operating and Maintenance Manual, Lifting Capacities.Brake Release Bar Location (16)
This message is inside the cab, behind the second seat.
Illustration 18 g06176160Indication of the location of the brake release bar that commands the railway axle brake release when the machine is towed on railway tracks.Fire Extinguisher (17)
This film is on the access door of the extinguisher compartment. The compartment is on the left side of the left-hand side tool box on the undercarriage.
Illustration 19 g06188539First-aid Kit (18)
This message is on the operator door near the handle.
Illustration 20 g06188564