1507159 CONNECTOR Caterpillar parts
5230, 784B, 784C, 785B, 785C, 789B, 789C, 793B, 793C, 994, 994D
Rating:
Alternative (cross code) number:
CA1507159
150-7159
1507159
CA1507159
150-7159
1507159
Weight: 0.74 pounds 0 kg.
Information:
ORFS DASH SIZE
20
ORFS SEAL PART NUMBER
6V8400
ORFS THREAD SIZE
1.69-12
OVERALL LENGTH
54
mm
PIPE DASH SIZE
8
PIPE THREAD SIZE
.50NPT
MINING EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 1507159:
Number on catalog scheme:
18
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01021531
Place accessory drive (8) in position and install bolts (7). Tighten the bolts to a torque of 100 20 N m (74 15 lb ft).
Install the following items in the front housing: gear (6), the bearing and shaft (5) and bolt (4). Tighten the bolt to a torque of 240 40 N m (177 30 lb ft).
Install the following items in the front housing: gear (3), the bearing and shaft (2) and bolt (1). Tighten the bolt to a torque of 240 40 N m (177 30 lb ft).Note: Make sure that the timing marks on the gears are in alignment.End By:
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the camshaft position sensor. Refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Install the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01021531
Place accessory drive (8) in position and install bolts (7). Tighten the bolts to a torque of 100 20 N m (74 15 lb ft).
Install the following items in the front housing: gear (6), the bearing and shaft (5) and bolt (4). Tighten the bolt to a torque of 240 40 N m (177 30 lb ft).
Install the following items in the front housing: gear (3), the bearing and shaft (2) and bolt (1). Tighten the bolt to a torque of 240 40 N m (177 30 lb ft).Note: Make sure that the timing marks on the gears are in alignment.End By:
Install the crankshaft position sensor. Refer to Disassembly and Assembly, "Crankshaft Position Sensor - Remove and Install".
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the camshaft position sensor. Refer to Disassembly and Assembly, "Camshaft Position Sensor - Remove and Install".
Install the alternator. Refer to Disassembly and Assembly, "Alternator - Remove and Install".
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".
Caterpillar parts catalog:
Parts connector Caterpillar catalog:
5P4619
CONNECTOR-CHECK
988B, FB518
988B, FB518
1716713
CONNECTOR AS
966G II, 972G II, 980G, 980G II, 980H
966G II, 972G II, 980G, 980G II, 980H
1286842
CONNECTOR
120H, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 966H, 972H, 980C, R1600H
120H, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 966H, 972H, 980C, R1600H
3353969
CONNECTOR AS
793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 966H, 972H, 980C, R1600H
793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 966H, 972H, 980C, R1600H
1618900
CONNECTOR
5110B, 5130B, 5230B, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 844, 844H, 854G, 854K, 988G, 988H, 990 II, 990H, 992G, 992K, 993K
5110B, 5130B, 5230B, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 844, 844H, 854G, 854K, 988G, 988H, 990 II, 990H, 992G, 992K, 993K
966G II
528, 528B, 530B, 814B, 815B, 816B, 950B, 950F II, 966D, 966F, D7G
950B, 950F, 950F II, 966D, 966F, 966F II, 970F
793F, 793F AC, 793F CMD, 793F-XQ, 994, 994D
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 993K, 994, 994D, 994F, 994H
8X2334
CONNECTOR
140H, 143H, 14H, 160H, 163H, 994
140H, 143H, 14H, 160H, 163H, 994
7W0228
CONNECTOR
5130, 784B, 785, 785B, 789, 994
5130, 784B, 785, 785B, 789, 994