CONNECTOR-UNION 3064352 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     155-0695     Thread Lock Compound     -    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01063765
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate plungers (4) and springs (5) with clean engine oil. Install the plungers and the springs in oil filter base assembly (3) .
Position gaskets (6) and covers (8) on the oil filter base assembly. Install bolts (7) .
Install O-ring seal (2) on plug (1). Install the plug in oil filter base assembly (3) .
If necessary, install taperlock stud (9) to oil filter base assembly (3). Tighten the taperlock stud to a torque of 81 14 N m (60 10 lb ft).Note: Apply Tooling (A) to the first 7.5 1.5 mm (0.30 0.06 inch) of threads at the base end of the taperlock stud.End By: Install the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".